|
12v Universal Harness
56 in stock
Item Number: TB422
Manufacturer: Trail Buddy Inc.
- This wiring harness is ideal for custom builds utilizing generic handlebar controls with bullet-style connectors, rather than multi-pinned plastic connectors.
- It features all female bullet connectors in the headlight bucket area for easy integration with current bullet-type handlebar controllers.
- The harness includes everything needed for a complete setup: connections for the flasher relay, CDI, ignition coil, voltage regulator/rectifier, rear brake switch, starter solenoid, taillight, and blinkers.
- It also comes with a fuse holder that includes a 15-amp main fuse and a spare.
- For a cleaner installation, consider the clone wire harness grommet with a larger diameter to accommodate the loom: Clone Wire Harness Grommet.
- The harness is accompanied by a generic electrical diagram.
- Note that due to its customizable nature, some wire connections may not be used depending on your specific build.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
The 3 amp version has 2 independent charging stations, and charges 12 volt batteries, the lowest battery it charges is a 6AH. Automatic charging and maintenance maximizes battery life. OEM-approved 5-stage charging algorithm saves time and energy.
|
MSRP: $42.00
Price: $36.00
You Save: $6.00 (14 %)
This replacement lock assembly will mount into the stock CT70 frames, our Skymaxx clone bikes. The 4-pin wire connections are a direct plug into the following harnesses we offer: TB160, TB515, TB531, and TB422. See web for more product information.
|
MSRP: $9.50
Price: $6.05
You Save: $3.45 (36 %)
Replacement Battery Band for Hondas and the Replicas. The new design is a little bit longer and has a rubber loop on the top to help cushion the battery. The band measures at 4.5 inches end to end.
|
MSRP: $29.70
Price: $18.50
You Save: $11.20 (38 %)
Must have for those 12v Conversions! Will fit both our 12v Parts Unlimited, and BS battery. This is NOT designed for the 6v batteries and will not work for the stock 6v batteries.
Measures 5x3 inches.
|
MSRP: $79.95
Price: $71.95
You Save: $8.00 (10 %)
Maintenance free
Acid pack included for initial filling
Upright installation only
Completely sealed after filling
Superior power & extended cycle life
No need to be recharged while stocked
Suitable for cold weather
Reduction of plate sulfation
|
12v Full-Wave Rectifier Assembly with 4 pin connector. All Trailbuddy engines are Full-Wave output for the best performance. If you purchased an engine elsewhere- you will want to check with the supplier as to what wave output is. It is important.
|
MSRP: $32.50
Price: $23.50
You Save: $9.00 (28 %)
12v Half-Wave Rectifier/Regulator Assembly with a 4 pin connector. This will not work with our engines but if you purchased an engine elsewhere that is a half-wave stator output and need a regulator/rectifier, we got you covered.
|
12v Ignition Coil Assembly with plug connections. This is the one to use with our Trouble free labeled harness.
|
MSRP: $38.95
Price: $38.23
You Save: $0.72 (2 %)
MAINTENANCE-FREE 12V BATTERIES
AGM Battery
WARNING: CANCER AND REPRODUCTIVE HARM-WWW.P65WARNINGS.CA.GOV
|
Price: From $3.50 to $5.99
We've assembled small kits of connectors and pins commonly used in our shop. These kits work with 18-22 gauge wire.
For easy storage and organization, check out this handy option: Small 6-Compartment Box.
|
MSRP: $46.95
Price: $42.25
You Save: $4.70 (10 %)
Safe: connection spark free, reverse polarity, short circuit and internal overheat protection; Auto detect lead acid or lithium technology
6V and 12V manual switch selection
|
MSRP: $10.99
Price: $5.99
You Save: $5.00 (45 %)
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
|
Product Reviews
|
|