|
|
CT70 Reproduction Harness 1974K3-1976 and some 1973/K2 Models
MSRP: $36.99
Price: $33.76
You Save: $3.23 (9 %)
8 in stock
Item Number: TB306
Manufacturer: Trail Buddy Inc.
- CT70 Reproduction Harness 1974K3-1976 and some 1973/K2 Models
- This reproduction harness is the main loom/harness only. Honda had made several "jumper connections" that are not included in the new harness.
- 1973/K2 models that were released after May 1, 1973, you will need this replacement harness. If your harness was released between January 1,1973 and April 30, 1973, you will need TB305.
- If your handlebar switches look like below- you will need this (TB306) harness.
- Note: The battery pigtail, connector, and fuse assembly are not included with this wiring harness. Honda treated that portion as part of the battery system, not the main harness. If you need the complete setup, it’s included with our 6v battery.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Price: From $20.95 to $25.01
BATTERY 6V- Includes acid pack and vent lines.
1961-71 Battery Number: 6N2A-2C
1972-73 Battery Number: 6N2A-2C-3
1974-79 Battery Number: 6N4C-1B
1980-82 Battery Number: 6N4-2A-8(6)
|
Honda Grommet Wire Harness best to use with the stock harness.
Fits CT70 1970-1982 models.
This is #4 in the diagram.
|
OEM Honda main/ignition switch with 2 keys. Fits CT70 (1972–1976). For use with stock 6V harness. Honda part, shown as #11 in the diagram.
|
MSRP: $12.99
Price: $7.49
You Save: $5.50 (42 %)
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
|
6V Relay Flasher for CT70 1974-1982 and CT90 1975-1979. This is the electrical component that makes the blinkers function properly. It is #17 in the diagram.
|
Replacement two prong 6v silicon rectifier for the stock CT70 1974(K3)-1982. It is used in other Honda machines for more recent years. It is #3 in the diagram.
|
|
|
7 Amp Fuse for 6v Battery
125v
|
MSRP: $26.99
Price: $23.49
You Save: $3.50 (13 %)
6v Ignition Coil designed to fit the stock CT70 K0-81 models. Will plug into your stock harness or new 6v harness-http://mytrailbuddystore.com/wireharness-6voemreplicas.aspx. Overall length 4inches- mounting pegs 2.5" center to center M6 washer/nut.
|
6V Stock Wire Harness Band for the Wire Harness in the Frame. Measures overall 6 inches. It is #7 in the schematic. CT70 1970-1978.
|
MSRP: $81.95
Price: $62.95
You Save: $19.00 (23 %)
Safe: connection spark free, reverse polarity, short circuit and internal overheat protection; Auto detect lead acid or lithium technology
6V and 12V manual switch selection
|
MSRP: $10.99
Price: $5.85
You Save: $5.14 (47 %)
This durable Clone Battery Band is designed for 6V batteries, measuring 3.5" x 1.25". Made of rubber with just the right amount of stretch, it secures your battery perfectly. Not suitable for most 12V applications due to limited stretch.
|
Product Reviews
|
|