|
|
Moose Racing Z50 Front Hub Bearing & Seal Kit
|
6 in stock
Item Number: PUA25-1172
Manufacturer: Moose Racing
·
Bearing
seals are double-lipped rubber that provides superior exclusion of water, dirt
and sand with improved grease retention
·
Steel
garter spring guarantees constant pressure on the axle shaft, extending the
life of the seal
·
Wheel
seals are type TC nitrile elastomer, specifically designed to keep out water,
dirt and sand
·
Seals
have a rubber-coated outside diameter that creates an optimum seal at the hub
·
High-speed,
low-drag bearings are EMQ quality
·
Kits
include all required bearings and seals
·
This
is a kit that will fit all the below models, so you may or may not use all
parts in the kit for you application.
Inspection: Check to make sure that all mating surfaces are clean and free of burrs and corrosion. Check all mating surfaces for wear and replace as necessary.
Wheels: Inner spacer edges must be square to seat properly against new bearings. If worn, replace. Outer wheel spacers should be inspected for wear from the external seal lip Replace as required.
Installation: Bearings should be mounted slowly with care, by using a fixture to apply force evenly to the bearing. When mounting the inner ring, apply force to the inner ring only. Similarly, when mounting the outer ring, apply force to the outer ring only, Bearings need to be kept square to the mating surface to avoid damage.
Suspension: Needle bearings should be installed with a press and installation tool to apply force evenly to the bearing.
Steering: Install the bottom bearing with a pipe tool that applies pressure evenly. Tip: Heating mating components will make installation easier due to the expansion of the part Grease all seal surfaces where they contact metal parts. Grease needle bearings thoroughly after installation.
Wheel Bearing Kit Front Honda Z-50 68-78, Z-50R 79-99, Z-50RD 86, Suzuki NMUU 30-01, NMUS 02 20, KMUSL U3 18, Wheel Beaning Kit Hear Honda 50R 94-99
| 1986
|
Honda
|
Z50RD
|
-
|
-
|
| 1979-1999
|
Honda
|
Z50R
|
-
|
-
|
| 1969-1978
|
Honda
|
Z50
|
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $18.59
Price: $13.31
You Save: $5.28 (28 %)
Theses are replacement brake shoes for the classic CT70, 1971+ Z50's and reproduction bikes. The brake shoes are made from high quality material for long use.
-This Part Will Fit-
All CT70s
All Replicas
|
IRC 3.50-8 off-road tire for front/rear use on the Honda Z50A, sized for small- to intermediate-cc bikes. 50% on-road, 50% off-road dual-purpose, multidirectional TW2 tread, 8" rim, tube type, 35J load/speed index.
|
The Bridgestone 3.50-8 off-road scooter tire, designed for front and rear use on the Honda Z50A, features an 8" rim diameter and TW2 tread pattern for superior traction on rugged terrain. Tube type, 35J load/speed index.
|
High-quality Japanese-made inner tube for 3.5/4.00-8 rims. Features a 90-degree JS-244A metal valve stem. Fits front or rear. See full description for specs.
|
Genuine Honda 12mm self-locking axle nut (#20 in diagram). Fits CT70 (1970 K0–1971 HKO), Z50 (1969–1978), and other Honda models. Replaces standard 12mm nut—no cotter pin needed.
|
Front Wheel Collar/Spacer for CT70/H 1969-1971; Z50A 1969-78; Z50R 1979-99; and QA50 1971, 1973-75. It is #6 in the diagram. This will not work on a later CT70- it is too long for the later year models.
|
8x16 hex bolt. It goes on many different models and in many different places. For example, the CT70 seat hinges, mufflers, Z50 rim areas
| |
Product Reviews
|
|