|
|
Advanced Rear Gas Shocks
|
43 in stock
Item Number: TB345Z
Manufacturer: Trail Buddy Inc.
The shocks have an eye to eye length of 13in / 330mm, CNC machined lower shock mounts and have a better rebound than the older versions. Comes with correct bushings for top mount. Price per Pair..
Stiffness is increased by tightening the spring preload. Good for a 180lb+ rider.
Air only will effect the rebound and is set by the factory we do not recommend changing factory settings.
Remember to install washers (see related products below) when installing. It will prevent the installed bushings from being pushed out of the shock overtime.
Mounting hardware not included.
Tested Fitment Makes:
All CT70s EXCEPT for the 1990's versions (mainly due to chain guard placement).
All Replicas, we
have confirmed for clones from 2017 and earlier. Some of the newer year
clones, we have not been able to test.
Will not work with the Ice Bear clone without modification with the chain guard.
Our aftermarket parts
are made for clone reproductions of the Trail 70 (DAX) and are very good
quality but are not made to Exact Honda Specifications.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $10.50
Price: $7.50
You Save: $3.00 (29 %)
Extra large outer washer to retain your shocks, this washer is a 1/8in thick and 1 ¼ OD. This would need to be installed both on the top and the bottom shock mounts. Correlates with #15 in the Honda Diagram.
Qty. 2
|
|
|
|
|
|
|