|
|
Alloy Skid Plate for Aftermarket Motors
Manufacturer: Trail Buddy Inc.
Aluminum Skid Plate for Aftermarket Engines
This aluminum skid plate is designed for aftermarket
engines and is available for both kickstart and electric start models.
Kickstart Dimensions:
- Length:
12 7/8"
- Width:
5.5"
- Curve
Starts: 8.5"
- Mounting
Space: 4 1/4"
Installation:
Recommended bolts for installation are M6 x 12 and M8 x 35.
Compatibility:
- IMPORTANT:
This skid plate will NOT fit 190cc motors.
- Successfully
installed on a 2022 Ice bear Champion—see pictures for examples.
Quality Assurance:
Our aftermarket parts are crafted for Skymaxx reproduction bikes and have been
installed on the aftermarket engines we sell, ensuring great fitment for the
price. While not made to exact Honda specifications, we've tested fitment on
our showroom stock CT70s to guarantee minimal modifications. Other aftermarket
brands may require additional adjustments.
|
 For Electric Motor For Electric Motor   For Non-Electric Start For Non-Electric Start   |
Product Options
| Engine Type & Color: |
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $739.99
Price: $585.00
You Save: $154.99 (21 %)
YX 140cc Engine, w/KickStart, Clutch 4 speed (N1234) 12v There is a lighting coil in this engine and will come with the following parts: Intake manifold, gasket, bolts, spark plug, gear shift lever, kick start lever, carburetor,CDI. See full web for more.
| |
Product Reviews
| (1 Rating, 1 Review) |
Average Rating:
|
Skid Plate on Ice Bear Champion LX
Marcus Alden
(Sammamish, WA)
3/16/2025 12:22 AM
Ordered this unit to put on My New (2025) Ice Bear Champion LX (PLZ125-2P). Fit up was fairly good though it did need to be tweaked a bit to fit properly. Several of the Sheared edges of the plate and side mounting struts were fairly sharp and needed the edges broken so that they won't cut you...quick file or sandpaper will do you good. For my set up I am using a Bolt, Lock Washer and Flat Washer..... with that the recommended bolt lengths were short. I used bolts that are 5mm longer. Also on the Left side (astride the bike looking forward) strut needed to have clearance notch cut/ground in the back edge where the Starter wire passes behind it. If you don't relieve this the wire will get cut and potentially ground out.
|
|
|