Mailing Lists

Search
Browse Categories

Tall Handle Bars-Scratch/Dent tall no pre-installed perch

<< Previous in Handle bars and Controls Next in Handle bars and Controls >>

Price: $45.00
Out of stock
Item Number: TB197S/D
Manufacturer: Trail Buddy Inc.
Typing Paragraphs in HTML

⚠ California Prop 65 ⚠

The picture doesn't show very well but there are scratches in the bars. SOLD AS IS, no warranty/no refunds/no returns.


Big handle bars, both left and right bars for all CT 70 handlebar mounts, comes as set. These bars are wider + 2" and taller +2" than the standard replica handle bars. A twist throttle system works the best, or an integrated twist throttle in a controller.
 
These do not have the welded perches. 

Please note that we are working on getting a Brake Cable long enough to work with the stock DRUM brake setup.
 

 

 

-This Part Will Fit/Mount-

All CT70s - you will need to research new cables- STOCK cables will be too short- since this bar is 2" taller than stock height. Check out the cable section: http://mytrailbuddystore.com/cables-3.aspx

All Replicas

Typing Paragraphs in HTML ⚠ California Prop 65 ⚠ WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.

Related Products

Tall Handle Bars-Smooth Bars Non-OEM Style
MSRP: $65.99
Price: $56.75
You Save: $9.24 (14 %)
Tall Handle Bars-Smooth Bars Non-OEM Style
Tall Handle Bars These bars are wider + 2" and taller +2" than the standard replica handle bars. Please see FULL description for CABLE OPTIONS.
CT70 LEFT HANDLE BAR CONTROLLER
Price: $27.82
CT70 LEFT HANDLE BAR CONTROLLER
Replacement Left controller for the reproductions bikes. Controls Include: Horn, Choke, Hi Lo Beam, and Blinkers. Please see full website for clutch cable recommendations.
CT70 RIGHT HANDLE BAR CONTROLLER
Price: $31.50
CT70 RIGHT HANDLE BAR CONTROLLER
This is a replacement right controller for the reproduction bikes. The controller has the electric starter button, headlight run light/on and an integrated twist throttle and grip. If you need the throttle cables please cable section parts #TB113a&TB300
FULL SIZE STRAIGHT PULL TWIST THROTTLE
MSRP: $40.95
Price: $36.85
You Save: $4.10 (10 %)
FULL SIZE STRAIGHT PULL TWIST THROTTLE
STRAIGHT PULL TWIST THROTTLE Universal for all 7/8" handlebars 4 1/2" sleeve length to fit all popular dirt grips Universal throttle cable included Inner cable approximately 44" L Replacement cable PART #110049
CT70 RIGHT HANDLE BAR CONTROLLER WITH BRAKE LEVER
Price: $39.00
CT70 RIGHT HANDLE BAR CONTROLLER WITH BRAKE LEVER
Replacement right controller with brake lever for the reproduction bikes. Controller buttons: starter, headlight run light/on, integrated twist throttle with grip and brake lever. If you need cables- please see TB113A and TB300.
Universal Twist Throttle
Price: $5.99
Universal Twist Throttle
Black Universal Twist Throttle Die-cast aluminum housing with black epoxy finish Fits 7/8 inch (22mm) bars Straight-pull assembly Recommended for 34mm or smaller straight-pull carburetors
Universal Twist Throttle Kit w/ Throttle Cable for Elbow Carb Top Kit
Price: $35.00
Universal Twist Throttle Kit w/ Throttle Cable for Elbow Carb Top Kit
Universal twist throttle and cable assembly. The twist throttle is made of good, hard plastic with a black cast aluminum throttle housing and clamps on with two phillips head screws. You have an option for cable, which all depends on carb top style.
Twist Throttle with electric start button
Price: $22.00
Twist Throttle with electric start button
Aftermarket twist throttle with electric start button. Also includes a grip.
Rear Brake Cable for TB Controller and Tall Bars
Price: $19.99
Rear Brake Cable for TB Controller and Tall Bars
Rear brake cable designed to work with Trailbuddy's taller bars and left controller with lever and the stock rear brake set up on a CT70. Overall length is 50 1/2 inches with a 3 1/4 inch throw.
Rear Brake Cable for a Universal Lever and TB Tall Bars
Price: $19.99
Rear Brake Cable for a Universal Lever and TB Tall Bars
Rear brake cable designed to work w/ our universal perch (PU43-1101L) & Trailbuddy's tall bars, and the stock rear brake parts on a CT70. Overall length is 51 3/4 inches with a throw of 4 1/2 inches. See pictures for routing and fitment questions.
Front Brake Cable for our tall bars to the drum hub
Price: $20.99
Front Brake Cable for our tall bars to the drum hub
Front Brake Cable for our tall bars to the drum hub with no internal switch to actuate the taillight. This cable is designed for use with our TB026RCBL and the stock drum hub. Please see full web description for dimensions.