|
Tall Handle Bars-Smooth Bars Non-OEM Style
MSRP: $65.99
Price: $62.43
You Save: $3.56 (5 %)
36 in stock
Item Number: TB197
Manufacturer: Trail Buddy Inc.

Our tall bar set are 2” wider and 2” taller than the
standard replica handlebars out on the market.
Sold as a pair.
These will mimic the Stock Honda CT70 1972-1978 in the
following respects:
- 7/8th diameter bars Similar dimensions in height and width
dimensions.
- Standard fold-down style
- Chrome plated steel
These differ from the Stock Honda CT70 1972-1978 in the
following respects:
- Bars are smooth and do not include the welded-on
clutch/brake lever perches
- Works best with clamp on/slide on components
- We highly recommend a twist throttle system, or
an integrated twist throttle in a controller.
Installation Notes:
o
Cables:
§
Front Stock CT70 DRUM Brake: https://mytrailbuddystore.com/frontbrakecableforourtallbarstothedrumhub.aspx
§
Rear Stock CT70 DRUM Brake w/ Trailbuddy Left
Controller (TB026LH): https://mytrailbuddystore.com/rearbrakecablefortbcontrollersandbars.aspx
§
Rear Stock CT70 DRUM Brake w/ universal Perch
(PU43-1101L): https://mytrailbuddystore.com/rearbrakecableforauniversalleverandtbtallbars.aspx
§
If LEFT Lever is a CLUTCH- that would depend on
your motor. Please see the clutch cable section for options: https://mytrailbuddystore.com/ct70clutchcables.aspx
- Please note that the bars do not always mount
into the stock CT70 handlebar clamp. They work best with our handle bar clamp,
which can be found here: https://mytrailbuddystore.com/clonehandlbarclamp.aspx
- Our aftermarket parts are made for the clone
Skymaxx reproduction bike and are exceptionally quality but are not made to
Exact Honda Specifications and exact fitment. We have installed them on our
showroom stock CT70 bikes prior to selling the item to make sure that they will
fit with the least amount of modification as possible. Any other brand of clone
bike may require other modifications.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Replacement Left controller for the reproductions bikes. Controls Include: Horn, Choke, Hi Lo Beam, and Blinkers. Please see full website for cable recommendations.
|
MSRP: $55.05
Price: $46.19
You Save: $8.86 (16 %)
This is an aftermarket controller assembly for any 7/8th handlebar& has more functions than a stock CT70. This is not a direct replacement for any stock CT70's. Product details and fitment suggestions in full description. THROTTLE CABLE NOW INCLUDED!
Ple
|
Front Brake Cable for our tall bars to the drum hub with no internal switch to actuate the taillight. This cable is designed for use with our TB026RCBL and the stock drum hub. Please see full web description for dimensions.
|
Universal Straight Pull Twist Throttle Setup
Fits all 7/8" handlebars with a 4-1/2" sleeve for popular dirt grips. Includes a universal throttle cable with a 44” sheath length and 39.5” cable length. Replacement cable available separately.
|
MSRP: $28.95
Price: $19.99
You Save: $8.96 (31 %)
We designed these replacement handlebar knobs to work with the stock Ct70/Z50 handlebar clamps. Even if you are using our tall bars but your stock clamp- these will work. Depending on your style top plate- you may or may not need a washer (not included).
|
Rear brake cable designed to work w/ our universal perch (PU43-1101L) & Trailbuddy's tall bars, and the stock rear brake parts on a CT70. Overall length is 51 3/4 inches with a throw of 4 1/2 inches.
See pictures for routing and fitment questions.
|
Rear brake cable designed to work with Trailbuddy's taller bars and left controller with lever and the stock rear brake set up on a CT70. Overall length is 50 1/2 inches with a 3 1/4 inch throw.
|
MSRP: $16.95
Price: $15.25
You Save: $1.70 (10 %)
Designed after the CR Honda grip
Available in soft, medium and firm compounds
For use with twist throttles
For 7/8" bars; 4-1/2" L
Sold in pairs
|
Eliminates grips slipping and sliding in the heat of the action
A must when using medium- or soft-compound Renthal grips
Available in 25mL tubes
|
Price: From $130.16 to $132.25
This is an aftermarket handlebar controller setup. This is a stock replacement for the reproduction bikes but can be installed on stock bikes with modifications. Please see the full web description for what is on each controller and fitment descriptions
|
Replacement Left Hand Grip. Firmer rubber to slide over the handlebar. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.
|
Replacement Right Hand Grip. Soft and flexible rubber to slide over the metal throttle pipe. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.#20 in the diagram.
|
MSRP: $47.05
Price: $43.99
You Save: $3.06 (7 %)
This is an aftermarket controller assembly for any 7/8th handlebar& has more functions than a stock CT70. This is not a direct replacement for any stock CT70's. Product details and fitment suggestions in full description. THROTTLE CABLE NOW INCLUDED!
|
Aftermarket twist throttle with electric start button. Also includes a grip.
|
Price: From $15.95 to $16.95
Universal Lever and Mount
|
Universal twist throttle and cable assembly. The twist throttle is made of good, hard plastic with a black cast aluminum throttle housing and clamps on with two phillips head screws. You have an option for cable, which all depends on carb top style.
|
MSRP: $2.25
Price: $1.84
You Save: $0.41 (18 %)
Honda White Wire Harness Band designed to hold down the cables on the handlebars. It is #3 in the schematic. Sold individually.
| |
Product Reviews
|
|