Features
Original PowerTye design features sewn-in soft-tye
4,500-lb. test nylon webbing
3/8” heavy-duty vinyl-coated hooks
PowerTye EZ-release, non-slipping teardrop buckle
1,200-lb. assembly strength
Hand loop for pulling tight
5 1/2’ length plus
|
MSRP: $12.95
Price: $9.95
You Save: $3.00 (23 %)
Black 10mm Universal Mirror
Folds down to be out of the way
4 1/2" diameter glass size; 5" L stem
Fits right or left side
Specs:
Round Glass
Made out of Aluminum
**Most classic Honda CT70's were an 8mm thread- you WILL need the Mirror Adapter***
|
MSRP: $75.00
Price: $69.30
You Save: $5.70 (8 %)
CT70 REAR LUGGAGE RACK. All CT70s FRAMES however some year bikes have other items installed that it will not work with - some years require modification. There is a 6 3/4 inch gap for where the taillight sits. Please see full description for fitment.
|
Lower Mount Exhaust shield 1 3/4".
Comes complete with clamps for mounting
Made in the U.S.A.
High-quality heat shields look great and keep you cool
Shields are triple chrome-plated and highly polished for a non-blueing look for years to come.
|
Honda Cloud Silver Touch Up Paint- we use on all our restorations!
Net Weight 12oz/340g aerosol spray can
|
Replacement Tool Holder Bag with a snap closure. It doesn't have the "Honda" logo stamped on it like the vintage bags. Tools are not included. This will work with many models. Bag size: 3.5 inches wide and 6 5/8 inches long when closed. #7 in diagram.
|
MSRP: $26.95
Price: $24.25
You Save: $2.70 (10 %)
· Available with standard or reverse 10mm thread
· Standard 10mm thread fits either side of most bikes, except Yamaha; reverse 10mm thread fits Yamaha right side
Sold individually
|
ACCESSORY SOCKET DESIGNED FOR HONDA GL1800 GOLD WING 01-08
Can be modified for CT70
Features
Allows easy use of GPS units, cell phone chargers, etc.
Plugs into on-bike accessory harness; no splicing required
Drilling required for installation
|
MSRP: $65.00
Price: From $50.00 to $63.00
CT70 REAR LUGGAGE RACK. All CT70s FRAMES however some year bikes have other items installed that it will not work with - some years require modification. Please see full description for fitment. Some scratches on top chroming.
|
Price: From $2.95 to $4.95
CUSTOM VALVE STEM CAPS
Distinctively anodized valve stem caps
Available in four different colors to spruce up your rims
Sold in pairs
|
This is a 1 liter bottle of BEL RAY foam filter oil. We use this stuff on our bikes with foam filters and this oil works great.
|
Price: From $3.05 to $4.05
MIRROR ADAPTER 8mm (bar) to -10mm (mirror) Reduce or increase thread size to allow mounting on 8mm or 10mm applications· Available with chrome or black finish.
You may have to tap the right hand mounting hole to make this thread in correctly.
|
MOTORSPORT PRODUCTS ECONO STEEL LIFT
Lifts both wheels of bike off the ground when in raised position
Lowers easily by lifting foot pedal with foot
Constructed of box steel tubing for maximum strength
Semi gloss black painted finish
Finished with
|
MOTORSPORT PRODUCTS MINI/SUPER MOTO STANDS
Diamond pattern on legs
Measures 13 1/2" tall
Works great for SuperMoto and Mini Bikes
Made of high-quality aircraft aluminum
Surface plates on legs keep it from sinking in soft soil
Heavy-duty aluminum
|
Seat stencil for the Honda Trail 70 replacement seats
|
Price: From $15.00 to $215.00
This is a new stand designed and built by Trail Buddy Inc. in the USA. TB needed something better to hold the frame, engine and bike for rebuild and assembly. See the full website for description. Due to increased material cost, we needed to raise prices
|
UNI FILTER SKID PLATE FOAM
Thick, very coarse foam keeps mud and grime from packing between engine and skid plate and allows water to drain away
Foam block is 8" x 10" x 2" thick
Trim to fit any application
Made in the U.S.A.
|
Wire Frame Clamp
Holds the wires going from the frame to the headlight bucket
|