|
|
BILLET ALUMINUM CNC MACHINED TOP PLATE
MSRP: $85.00
Price: $64.00
You Save: $21.00 (25 %)
Backordered
Item Number: TB086
Manufacturer: Trail Buddy Inc.
BILLET ALUMINUM CNC MACHINED TOP PLATE
This is a new billet aluminum top plate made by Trail Buddy. The top plate is made to fit your classic mini trail 70 or reproduction bike. These top plates will allow you to use your speedometer bracket that bolts under the plate. The billet top plate can be used with either the classic handle bar mount or the reproduction mount. Can be used with the BMX style bars/risers but you will need to drill mounting holes for the risers.
These are a tumbled polish, this allows the customer to choose the best finish for their build. You can easily sand it down for painting, leave as is, or do a higher polish finish on it.
Will Fit:
1972+ CT70's
* the mounting holes are not narrow enough for the first few years forks*** |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $37.95
Price: $27.95
You Save: $10.00 (26 %)
Replacement handle bar clamp for most replica bikes. It will only work with our aftermarket bars. It will NOT WORK w/ a stock plate. See full web for more.
|
MSRP: $65.00
Price: $30.00
You Save: $35.00 (54 %)
Replacement Triple Tree for either our 30mm Fork Assemblies (TB149 or TB167) or the clone 26mm Fork Assemblies. It will slide over the stock 26mm forks but you will not be able to use the rubber boots and the stock fork ears will not fit.
|
MSRP: $23.50
Price: $17.50
You Save: $6.00 (26 %)
TrailBuddy steering stem bearings kit is designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings.Tapered roller bearings provide decreased maintenance along with less wear, smoother operation and longer life.
|
|
MSRP: $28.95
Price: $20.00
You Save: $8.95 (31 %)
We designed these replacement handlebar knobs to work with the stock Ct70/Z50 handlebar clamps. Even if you are using our tall bars but your stock clamp- these will work. Depending on your style top plate- you may or may not need a washer (not included).
|
MSRP: $300.00
Price: $235.99
You Save: $64.01 (21 %)
This is a full front-end assembly.
The assembly will include the forks, axle, hub, disc brake, caliper, pads, brake lever assembly, 30mm triple tree, and speedometer gear and speedometer cable. There is more information on these in the full web version
|
Price: From $365.39 to $373.49
Billet CNC Disc Brake Kit 30mm-This is a full front-end kit. Please see full web version for more information and fitment recommendations.
| |
|
|