|
|
Billet CNC Disc Brake Assembly 30mm
Price: From $373.49 to $385.49
Insufficient Quantities to Sell as a Kit
Manufacturer: Trail Buddy Inc.
International Shipping Cost is an ESTIMATE. We will call with amount to ship.
This is a full front-end kit. This kit will come with the Triple tree, TB149 - CT70 DISC BRAKE ASSEMBLY, 30mm CNC Ears and Billet CNC Top Plate (either pre-drilled for the fold down handle bars (TB086) or the top plate where you drill the holes for your risers that you need for the BMX style bars). This is a bolt in kit, just un-mount your hub from your rim and bolt the new one in. Disassemble your forks and install the new ones with the brake lever assembly. This assembly comes with all listed parts /
This is the best way to go if you are installing this onto a CT70 manufactured from 1969-1971! If installing on a K0/HK0- you will need either a 1972-198 handlebar clamp or you will need our aftermarket handlebar clamp, TB044, here: https://mytrailbuddystore.com/clonehandlbarclamp.aspx
In addition, if your bike has the welded on brake lever style handle bars, you may want to get a new set of smooth handle bars to help mount the brake lever and clamp (see our web site).
Fork travel approx. 6 inches
Diameter of shock tube - 30mm
Diameter of disc brake - 8 inch
Fork seal kit to repair leaks PUFS-004
Installed Brake Hose measures at 36 inches
Speedometer is a square peg on the hub end. Replacement speedometer cables, depending on length: https://mytrailbuddystore.com/speedometercable.aspx or https://mytrailbuddystore.com/longerspeedometercable-clone.aspx
If you have purchased these oil refill instructions: 90cc of 7 or 10wt Fork Oil or Auto Transmission Fluid
We have found that it fits most stock CT70 frames- if it is not fitting correctly in the neck of the frame, there is a good chance that the frame has been damaged.
**If you are installing this on the 1975 CT70- you will need the longer speedometer cable TB227
|
Product Options
| Handle Bar Set Up: |
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Replaces the front fork speedometer gear only, WILL NOT WORK ON THE ORIGINAL OEM FORKS. Fits a 10mm axle.
|
MSRP: $125.00
Price: $115.00
You Save: $10.00 (8 %)
Headlight bracket ears designed to fit our 30mm front fork hydraulic brake kit to mimic the stock style of CT70 1972+ headlight brackets. They will slide over the fork tubes and will mount in between the top plate and the top of the triple tree.
The
|
MSRP: $48.50
Price: $35.50
You Save: $13.00 (27 %)
Replacement brake rotor for our 30mm Front End Kit (either TB149 or TB167A/TB167B). It will also work as a replacement rotor for the Skymaxx bikes.
|
Multi-purpose Waterproof Grease Outstanding mechanical stability, with extreme pressure additives for high load carrying and extra shock protection
High-temperature grease for use up to 302°F, and suitable for disc brake applications
|
SS-8 (10W) Suspension Fluid was developed by Showa Mfg. Co., Ltd. for the Honda Race Team. Years of research and development and racing victories have resulted in a high performance fluid engineered for today's sophisticated suspension systems.
|
Replacement Brake Lever for 30mm Disc Brake Assembly
This is a replacement lever for our 30mm Front Fork Assemblies (TB149 or TB167/TB167B). Does not fit Ice Bear Champions forks systems.
|
Replacement brake pads for the 30mm Fork Disc Assemblies.
This will not work on the invereted front fork assembly.
-This Part Will Fit-
All CT70s or replicas with the disc brakes
| |
Product Reviews
|
|