High Gloss Coating - Silicone Detailer Restore the factory shine with a superior detailer specifically formulated for the powersports industry Cleans, polishes & conditions plastic, fiberglass and painted surfaces
Also effective as a light lubricant fo
|
MSRP: $2.45
Price: $2.00
You Save: $0.45 (18 %)
Honda White Wire Harness Band designed to hold down the cables on the handlebars. It is #3 in the schematic. Sold individually.
|
Clone Speedometer Cable with square pegs on both ends. Will NOT work for stock hubs. It measures 26.5 inches overall and the sheath length is 25 7/8 inches.
Liquidating stock. This is a non returnable/non refundable item.
|
Front Brake Cable with Switch for CT70 (1970) and CT70H (1971)
This front brake cable features a switch and is designed specifically for the CT70 (1970) and CT70H (1971).
Overall Length: 44 inches
Diagram Reference: #9
|
Outer Throttle Cable Holder for stock Honda setup. Will fit: CT70 1969-1974; and Z50A 1969-1978. It is #18 in the diagram.
This is a Right hand thread.
|
2in Longer Clone Throttle Cable twist in style.
Replacement throttle cable for the replicas bikes.
31" sheath and 35"cable length
This will only work with our TB026RC and/or TB026RCBL controllers and best with our Tall bars (TB197).
|
Replacement Speedometer Cable for our 30mm Forks(TB149/TB167)or clone motorcycle with square ends on both ends. Not for OEM style split end. This cable is 31 1/2inches long.
|
OEM Front Fender Cable Guide which mounts on the left side of a stock fender. This will also mount onto our aftermarket fenders, however, it will then need to be mounted on the right side of the fender. Will fit CT70 1970-1979. It is #4 in the diagram.
|
Clone Clutch Cable 41.25" long
Works with the TB026LH controller to either the TB526 Lifan 125cc Manual; 140cc manual electric start (TB593) or the CT70 H Motor
|
Genuine Honda OEM Throttle Cable Grommet.
Mounts on the inside of the handlebars and is shown as #2 in the diagram. Most models use 2–3 grommets.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
Short Reproduction Speedometer Cable use this one if you have a stock headlight bucket that holds the speedometer in the same unit.
Cable Length is 25", sheathing length is 22 3/4".
Please see full description for fitment recommendations.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
CT70 Longer Speedometer Cable- Split Tongue use this one if you have the speedometer and headlight bucket in separate units.
Overall length is 28 1/2" and sheathing is 26 1/4".
Please see full description for fitment recommendations.
|
MSRP: $22.55
Price: $20.85
You Save: $1.70 (8 %)
OEM-style reproduction clutch cable with grey sheathing. Fits CT70H and CT70 HK1 (1971-1972) and most aftermarket motors with stock bars/lever setup. Also compatible with TB526 125cc and TB593 140cc engines. Original Honda part number: 22870-098-970.
|
MSRP: $23.09
Price: $20.89
You Save: $2.20 (10 %)
Trailbuddy has reproduced the CT70 Rear Brake Cable with Grey Sheathing. This cable is designed to fit on the CT70 1970/K0 style model.
Overall sheath length with pull is 44". Sheath length is 39 1/8". Has adjustment section just like original stock
|
MSRP: $24.08
Price: $21.99
You Save: $2.09 (9 %)
Trailbuddy has reproduced the 1972-1974 CT70 Throttle Cable with Grey Sheathing. The overall length is 35 inches and the sheathed cable length is 31.25". Will fit: CT70 1972-1974
|
Trailbuddy specifically designed this cable to work with our YX140cc motor and the Parts Unlimited Universal Lever (PU43-1101L). This cable is designed to mount into the clutch motor mount that is provided with motor.
|
Rod Brake Joint screw/bullet screw for front & rear applications. If purchasing TB172 for stock you will need to purchase. Fist: CT70 1970-1976; CT90 1966, 1969-1975; Z50A 1969-1975; and Z50R 1976-1999. Front App: #18 in diagram. Rear App: #5 in diagram
|
Clutch cable for YX140cc engines with TB026LH left-hand controller. Designed to mount to the engine clutch bracket. Longer length may require creative routing on some CT70 setups. Please see full description for more fitment specifications.
|
Brake Adjusting Nut- Front and Rear Applications. Will fit CT70 1970-1976, Z50A 1969-1976, Z50R 1980-1999 and CT90 1966, 1969-1976. Front Application: #19 in diagram (pictured first). Rear Application: #6 in diagram. (pictured second)
|
Genuine Honda rear rod brake spring (#4 in diagram). Fits CT70 (1970–1994), CT90 (1966, 1969–1972, 1974–1979), Z50A (1971–1978), and Z50R (1979–1987). See full description for fitment details.
|