|
|
Cables
Genuine Honda OEM Throttle Cable Grommet.
Mounts on the inside of the handlebars and is shown as #2 in the diagram. Most models use 2–3 grommets.
|
Cable Life Minus 70° is a general purpose and cable lubricant. Also for carbs, ignition locks and steering mechanisms. Lubricates & rust-proofs w/ a nondrying film
Kit includes luber tool, lubricant & special fitting for lubricating cables.
|
MSRP: $2.56
Price: $2.04
You Save: $0.52 (20 %)
Honda White Wire Harness Band designed to hold down the cables on the handlebars. It is #3 in the schematic. Sold individually.
|
Outer Throttle Cable Holder for stock Honda setup. Will fit: CT70 1969-1974; and Z50A 1969-1978. It is #18 in the diagram.
This is a Right hand thread.
|
Wire Frame Clamp
Holds the wires going from the frame to the headlight bucket
Ideal for clone wire harnesses and conversion kits, which will accommodate the thicker 12v harnesses.
|
OEM Front Fender Cable Guide which mounts on the left side of a stock fender. This will also mount onto our aftermarket fenders, however, it will then need to be mounted on the right side of the fender. Will fit CT70 1970-1979. It is #4 in the diagram.
|
Wire Harness Clip/Guide helps keep your wire harness snug against the frame. Will fit CT70 1970-1979 and ST90 1973-1975. It is #7 in the diagram. Mounting hardware not included.
|
OEM Fr. Brake Adjusting Bolt and Fixing Nut CT70's 1975-1979
It is numbers #1 & #15 in the diagram.
| |
|
|