CT70 Front Hub Bearing & Seal Kit
This is a kit has the correct bearing and seals for several different Honda models. For the CT70 application, you will only use the two bearings and one seal. For reference, #32 and #19 in the schematic.
|
Fork Oil Seal
Fork Oil Seal (20.7x30x7)
Will Fits: Z50A 1969-1975, CT70 1970, CT70H 1971 (6 digit VIN #'s)
|
Direct from Honda, replacement Front Fork Boots for Z50A 1969-1978, CT70 1970-71Front Fork Boots for Z50A 1969-1978, CT70 1970-71
You will need to reuse your original chrome ring.
Sold individually.
Will fit:
Z50A 1969-1978
CT70 1970-1971
|
SS-8 (10W) Suspension Fluid was developed by Showa Mfg. Co., Ltd. for the Honda Race Team. Years of research and development and racing victories have resulted in a high performance fluid engineered for today's sophisticated suspension systems.
|
MSRP: $14.85
Price: $11.00
You Save: $3.85 (26 %)
This affordable Triple Tree Nut Kit offers a cost-effective alternative to OEM parts. Designed for clone CT70 models, it’s compatible with all years of the original Honda CT70.
Will fit most models.
|
Front Fork Seal for CT70 1972-1982. Sold individually. It is #6 in the diagram.
These have 7 digits in the VIN #.
|
MSRP: $15.95
Price: $11.50
You Save: $4.45 (28 %)
TrailBuddy steering stem bearings kit is designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings.Tapered roller bearings provide decreased maintenance along with less wear, smoother operation and longer life.
|
Front Fork Boot CT70 1972-1979. Sold individually. It does not come with the chrome cap (has been discontinued by Honda). It is #20 in the diagram.
|
OEM Front Fender Cable Guide which mounts on the left side of a stock fender. This will also mount onto our aftermarket fenders, however, it will then need to be mounted on the right side of the fender. Will fit CT70 1970-1979. It is #4 in the diagram.
|
Reflector for front forks. Rubber base has been discontinued from Honda. Sold individually. Will fit: CT70 1972-1994; CT90 1969-1972, 1974-1979. It is #1 in the diagram.
|
Reflector for CT70 K0/HK0 and Z50A 1970-1971. Sold individually. The rubber bases have been discontinued from Honda. It is #1 in the diagram.
|
Upgrade your bike with our USA-made billet aluminum top plate by Trail Buddy, designed for CT70 (1972-1978). Features pre-machined holes for BMX/custom bars, speedometer compatibility, and a customizable finish. Perfectly pairs with our 30mm forks!
|
Late model CT70 Fork Bolt Kit with Washer and O-Ring. Will fit CT70 1972-1979.
#27,28, and 29 in the diagram.
|
Fork Bolt Kit for CT70 1970 includes the Bolt hex and the washer. This is the kit that will screw onto the top plate and the fork tube. The kit is #14 and #15 in the diagram. This will only work on the forks for a 1969-1970 CT70 model
|
Triple Tree/Steering Bearing Lower Nut. Will fit: CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1994; and CT90K1 1969. It is #11 in the diagram.
|
Front Fork Pin Spring. Will fit: CT70/CT70H (1970-1971); and Z50R 1979-1999. It is #12 in the diagram.
|
Triple Tree/Steering Bearing Washer. Will fit: CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1999; and CT90 K1 1969. It is #14 in the diagram.
|
Triple Tree/Steering Bearing Top Nut. Will fit: CT70 1970-1994; CT90 K1 1969; Z50A 1969-1978; and Z50R 1979-1999. It is #13 in the diagram.
|
Lower Fork Slide Bushing. Will fit: CT70/CT70H (1970-1971); and Z50R 1979-1999. It is #11 in the diagram.
|
Front Wheel Collar/Spacer for CT70/H 1969-1971; Z50A 1969-78; Z50R 1979-99; and QA50 1971, 1973-75. It is #6 in the diagram. This will not work on a later CT70- it is too long for the later year models.
|
Replacement Honda CT70 K0/HK0 Reflector and Base designed to replace OEM33744-045-670. Sold individually. Will fit: CT70 1969-1971; Z50A 1970-71 (K1 &K2); and SL125 1971.
#1 and 2 in the Honda schematic.
|
Replacement Rubber Reflector Base. Sold individually.
Will Fit: CT70 1972-94
It is #1 in Honda schematic.
|
Front Fender Mounting Bolt Kit
This kit will include 2 M6x16 Bolt, 3 M6 flat washers and 1 M6x8 screw.
These are number #15,16, and #20 in the schematic.
|
Rear Fender Mounting Bolt Kit
Bolt Kit comes with 4 M6x10 Hex screws and 4 M6 Flat washers.
The kit includes #15 and #19 in the schematics.
|
Honda Steering Bearing Washer/Shim. It is #9 for a 1969-1971 CT70 triple tree or #7 in the CT70 1972-82 models.
|
MSRP: $125.99
Price: $93.49
You Save: $32.50 (26 %)
Nice reproduction cast aluminum handlebar clamp for the 1969-1971 CT70 K0 spring loaded fork system. Same width as stock. Comes with the locking nuts and knobs.
|
New front fender meant for Honda CT70's, direct bolt on to any original triple tree or our aftermarket forks. Has correct mounting holes for the cable guide. Does not have a rolled lip like original. WILL NOT FIT AN ICEBEAR CHAMPION.
|
MSRP: $22.50
Price: $18.00
You Save: $4.50 (20 %)
Save with this discounted kit featuring the steering stem bearings and triple tree nut kit. Upgrades to tapered roller bearings for smoother operation, reduced maintenance, and longer life. Fits most Honda CT70 and compatible models.
| | |