Genuine Honda OEM Throttle Cable Grommet.
Mounts on the inside of the handlebars and is shown as #2 in the diagram. Most models use 2–3 grommets.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
Short Reproduction Speedometer Cable use this one if you have a stock headlight bucket that holds the speedometer in the same unit.
Cable Length is 25", sheathing length is 22 3/4".
Please see full description for fitment recommendations.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
CT70 Longer Speedometer Cable- Split Tongue use this one if you have the speedometer and headlight bucket in separate units.
Overall length is 28 1/2" and sheathing is 26 1/4".
Please see full description for fitment recommendations.
|
MSRP: $22.55
Price: $20.85
You Save: $1.70 (8 %)
OEM-style reproduction clutch cable with grey sheathing. Fits CT70H and CT70 HK1 (1971-1972) and most aftermarket motors with stock bars/lever setup. Also compatible with TB526 125cc and TB593 140cc engines. Original Honda part number: 22870-098-970.
|
MSRP: $24.80
Price: $21.99
You Save: $2.81 (11 %)
Trailbuddy has reproduced the 1969-1971 CT70 Throttle Cable with Grey Sheathing. The overall length is 34.5 inches and the sheathed cable length is 30.75". Will fit: CT70 1969-1971, 1969-1971 Z50 but will be a bit long.
|
Cable Life Minus 70° is a general purpose and cable lubricant. Also for carbs, ignition locks and steering mechanisms. Lubricates & rust-proofs w/ a nondrying film
Kit includes luber tool, lubricant & special fitting for lubricating cables.
|
Front Brake Cable with Switch for CT70 (1970) and CT70H (1971)
This front brake cable features a switch and is designed specifically for the CT70 (1970) and CT70H (1971).
Overall Length: 44 inches
Diagram Reference: #9
|
Outer Throttle Cable Holder for stock Honda setup. Will fit: CT70 1969-1974; and Z50A 1969-1978. It is #18 in the diagram.
This is a Right hand thread.
|
MSRP: $23.09
Price: $20.89
You Save: $2.20 (10 %)
Trailbuddy has reproduced the CT70 Rear Brake Cable with Grey Sheathing. This cable is designed to fit on the CT70 1970/K0 style model.
Overall sheath length with pull is 44". Sheath length is 39 1/8". Has adjustment section just like original stock
|
MSRP: $24.08
Price: $21.99
You Save: $2.09 (9 %)
Trailbuddy has reproduced the 1972-1974 CT70 Throttle Cable with Grey Sheathing. The overall length is 35 inches and the sheathed cable length is 31.25". Will fit: CT70 1972-1974
|
Clutch cable for YX140cc engines with TB026LH left-hand controller. Designed to mount to the engine clutch bracket. Longer length may require creative routing on some CT70 setups. Please see full description for more fitment specifications.
|
Replacement Front Brake Switch for Late Models CT70's (1977-1982). It is #4 in the diagram.
|
Meant for the stock welded on handle bar perch on a 1972-1974 CT70. See further description for measurements.
|
MSRP: $28.49
Price: $21.99
You Save: $6.50 (23 %)
Replacement front brake cable for CT70 (1972 K1/HK1 - 1974 K3) with integrated brake switch and grey sheathing. Can also be used on 1969-1971 CT70 K0. See full description for detailed fitment information. Does not include brake spring and nut.
|
MSRP: $26.99
Price: $23.99
You Save: $3.00 (11 %)
The cable you've been looking for! This is meant to work with most carburetors and the stock 1969-1974 CT70 throttle setup. Ideal for your larger aftermarket engine swap. Click more info for details.
|
The ultra versatile cable! This cable is meant to go from your YX or Piranha 140cc style clutch arm to stock 1969-1972 perches and levers, our TB026LH controller, and universal perches. Further information available on main description.
|
Reproduction throttle cable for a 1979-1981 CT70, Honda part number 17910-179-700 or 17910-126-720;Measurements:
Overall Length: 31.9 inches
Throw Length: 3.94-4.33 inches
| |