|
|
Home
CT70 CARB TYPE 2, 20mm
MSRP: $65.00
Price: $45.00
You Save: $20.00 (31 %)
52 in stock
Item Number: TB033B
Manufacturer: Trail Buddy Inc.
Mounting holes 48MM (For a 1969-1977 CT70)
Holes taped for M6x1 bolt
Great option for the 125cc engine with the independent on/off/res switch.
Single 3/16 fuel inlet on the left side NO fuel shut off or filter
Choke is on left
Idle and air/fuel adjustment screws are on the right side
Fuel bowl has a drain
Carb needs 54MM of cable inside and 42MM of operation to achieve wide open throttle
The top has 5MM of cable adjustment and is 2 piece
Air filter mount size is 34MM
Air filter size
-Loose fit 1.5 inch filter-: PUUP-4152, PU1011-0744, TB014, TB014C, PU10113154
-Tight fit 1.25 inch filter- PU1011-0741, PU1011-0743, TB014B, PU10113153
Overall height 5.25 inches
Recommended fuel filter PU901C
*This is too big to be used as a stock
Z50 replacement but if you have a larger engine in a Z50 frame this
could work if the specifications are correct.*
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $5.95
Price: $5.35
You Save: $0.60 (10 %)
3/16 INLINE FUEL FILTER-
|
10MM tall intake adaptor plate with 12 mounting position available to get your carb to fit they way you want it;
Includes mounting bolts for the intake adaptor plate to the cylinder head
Also includes two paper gaskets.
|
MSRP: $29.50
Price: $22.50
You Save: $7.00 (24 %)
Turned Out Intake Manifold for Aftermarket Motors comes with an insulator, gasket and bolts to attach to your aftermarket carb. The intake measures 47.5 mm center to center on the carb side. Not designed to work with a stock CT70 motor/Carb.
|
MSRP: $22.95
Price: $20.65
You Save: $2.30 (10 %)
1.5 inch or 38mm mounting flange
Durable vinyl mounting base for longer life and better fit
Seamless design for maximum airflow
Made in the U.S.A.
|
MSRP: $24.95
Price: $22.45
You Save: $2.50 (10 %)
Clamp directly to carburetor
Angled or straight design; black inner foam, red outer foam and a urethane flange
The
| |
|
|