|
CT70 K0 Stock Bars
MSRP: $24.80
Price: $21.99
You Save: $2.81 (11 %)
Trailbuddy has reproduced the 1969-1971 CT70 Throttle Cable with Grey Sheathing. The overall length is 34.5 inches and the sheathed cable length is 30.75". Will fit: CT70 1969-1971, 1969-1971 Z50 but will be a bit long.
|
MSRP: $125.99
Price: $84.99
You Save: $41.00 (33 %)
Nice reproduction cast aluminum handlebar clamp for the 1969-1971 CT70 K0 spring loaded fork system. Same width as stock. Comes with the locking nuts and knobs.
|
Will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978; and QA50 1973-1974 (K1-K3) Left Grip. It is #19 in diagram.
|
Grip will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978 (K3-K6); and QA50 1973-1974 (K1-K3). It is # 18 in diagram.
|
MSRP: $50.95
Price: $43.31
You Save: $7.64 (15 %)
Stock Throttle Rebuild Kit - all the parts you will need to rebuild a sloppy throttle setup, with a 10% discount. This kit does not include the throttle cable holder since that is included with a throttle cable. #'s 13,17,26 and 15 in diagram.
|
Dimmer Switch Assembly for CT70 (1970-1972). Includes Hi/Low switch, new hardware, and black wire sheath. Typically mounts on the left handlebar. Item #4. Includes #30 and #28 (not pictured) in the diagram.
|
MSRP: $28.95
Price: $19.99
You Save: $8.96 (31 %)
We designed these replacement handlebar knobs to work with the stock Ct70/Z50 handlebar clamps. Even if you are using our tall bars but your stock clamp- these will work. Depending on your style top plate- you may or may not need a washer (not included).
|
OEM Handlebar Pivot Screw and Hex Bolt Kit for mounting perch levers on stock Honda welded-on handlebars. Includes pivot screw and nut, parts #27 and #29. Fits Honda CT70 (1970-1974) and Z50A (1969-1978).
|
Pan screw 3x12- Dimmer Switch screw
|
Eliminates grips slipping and sliding in the heat of the action
A must when using medium- or soft-compound Renthal grips
Available in 25mL tubes
|
Replacement Left Hand Grip. Firmer rubber to slide over the handlebar. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.
|
Replacement Right Hand Grip. Soft and flexible rubber to slide over the metal throttle pipe. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.#20 in the diagram.
|
Right and Left replacement levers CT70 serial # up to 186004; Will fit most early CT70 models but designed for CT70 1969-1970; Will also fit Z50A 1969-1970.
|
Throttle Cable Grommet that mounts on the inside of the handlebars. It is #2 in the diagram. Will fit:
CT70 1970-1974; Z50A 1969-1978; CT90 1966, 1969-1972, 1974. Will also fit other Honda models.
|
MSRP: $2.25
Price: $1.84
You Save: $0.41 (18 %)
Honda White Wire Harness Band designed to hold down the cables on the handlebars. It is #3 in the schematic. Sold individually.
| |
Product Reviews
|
|