|
|
CT70KO-79 Stator Assembly/Z50K1 Stator Assembly
|
Out of Stock
Item Number: TB307A
Manufacturer: Trail Buddy Inc.
- Reproduction Stator Assembly Kit for the CT70KO thru 1979 models (Not for the 4
speed H model) and the Z50K1 Models.
- It is virtually identical to the original and comes complete
with everything you need to get your stator back in working order except for the
plate itself (both coils, condenser, points, wiring, screws, O-ring, oil seal -
see picture).
- For the later year bikes with a neutral light, you will need to reuse or make the wire that goes to the neutral switch in the motor.
- **The coils will work on a 1980-1981 model HOWEVER you will need to reuse the connector pin of the original bad stator plug, since that is a male connector and the new kit has a female connector**
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
This durable, left-hand external puller is crafted from carbon steel with an oxide finish. Designed for Honda CT70, Z50, and other models, it features a metric thread size of M27 x 1.0, ensuring precision and reliability for flywheel applications.
|
JIS steel pan head bolt kit for the left crankcase cover. Includes bolts #18, #19, and #20. For models with points cover, see kit TB500 (#22). See full description for details.
|
Honda replacement stator seal 6x1.7 (the small seals around the bolts)
Fits Honda CT70 and Z50, will fit other models, just cross reference the numbers.
#17 in the schematic.
|
Ignition Points Cover Screw Set (2) – M5x12 bolts (#22 in diagram). Replaces bolts on the left crankcase cover with a circular removable ignition points cover. These also work well with the front fender cable guide. See full description for details.
|
Singular gasket for the Left Crankcase Cover over the ignition points cover. This is only used if your crankcase cover has an individual cover over the points. Will fit CT70 1971-1982. #6 in diagram.
|
This is a replacement screw for either the air filter hose or the screw that holds the alternator to hold the lighting coils on. It is # 6/18 in diagram.
|
Honda specialty 10mm Hex bolt for the flywheel component. It is #26 in the diagram.
|
Magnet Fixing Washer for the Flywheel
Will fit all CT70's and Z50A's. Will fit other Honda motors but you will need to cross reference those.
It is #14 in the diagram.
|
Product Reviews
|
|