|
|
Clone/DAX Speedometer 140km/80mph-12V
|
46 in stock
Item Number: TB265
Manufacturer: Trail Buddy Inc.
- This is a 12v speedometer that
will work in the 12v headlight/speedometer bucket (TB080) with a male
connector.
- This speedometer has KM/H on top
(more visible) and the MPH is on the bottom. This tops out at the 80mph
mark.
- This product is designed to plug
directly into our 12v Labeled Harness, part number TB160 (harness is also
included in kit TB161) without any modifications. If you are
purchasing this item to use with a different harness, there may be
modifications that you will be responsible for.
- **Please note, this will
physically fit into the stock CT70 1969-1971 K0 headlight bucket (if your
bucket is in good condition and has not been reworked or warped) and will
work with the stock speedometer cable. It will NOT, however, have
any lights that work on the stock 6v system. It, again, is wired for
a 12v system/harness (like our TB160) and will need major modifications to
the wire connections to work on the stock CT70 6v harness/system.
- This item is included in our 12v aftermarket headlight bucket assembly, part number TB523A/B.
- If you have a 1990's CT70, this will not work as a replacement option as a stand alone. If you need to replace any headlight bucket, headlight or speedometer unit on your 1990's CT70, you will need to get our TB523 Headlight Bucket Assembly, but you may have to re-wire some connections.
- Our aftermarket parts are
made for clone reproductions of the Trail 70 (DAX) and are very good
quality but are not made to Exact Honda Specifications.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Price: From $90.75 to $137.21
We designed this harness to work with all our electrical components to make it a truly trouble free harness with plug and play. This is a generic 12v harness and may come with additional connections that you may or may not use. See full web for more.
|
Metal headlight bucket for reproduction bikes or modified stock bikes. Not a direct replacement for stock CT70's. This unit is the one that holds the headlight and speedometer. Please see "More Info" for specific fitment notes.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
CT70 Longer Speedometer Cable- Split Tongue use this one if you have the speedometer and headlight bucket in separate units.
Overall length is 28 1/2" and sheathing is 26 1/4".
Please see full description for fitment recommendations.
|
Replacement Speedometer Cable for our 30mm Forks(TB149/TB167)or clone motorcycle with square ends on both ends. Not for OEM style split end. This cable is 31 1/2inches long.
|
MSRP: $21.45
Price: $20.35
You Save: $1.10 (5 %)
Short Reproduction Speedometer Cable use this one if you have a stock headlight bucket that holds the speedometer in the same unit.
Cable Length is 25", sheathing length is 22 3/4".
Please see full description for fitment recommendations.
|
Clone Speedometer Cable with square pegs on both ends. Will NOT work for stock hubs. It measures 26.5 inches overall and the sheath length is 25 7/8 inches.
Liquidating stock. This is a non returnable/non refundable item.
|
Product Reviews
|
|