|
|
CT70 Throttle Cables
Trailbuddy has reproduced the 1969-1971 CT70 Throttle Cable with Grey Sheathing. The overall length is 34.5 inches and the sheathed cable length is 30.75". Will fit: CT70 1969-1971, 1969-1971 Z50 but will be a bit long.
|
Threaded end Throttle Cable; "M10.125 Thread";Will Fit: Clones and Stock CT70's with the thread style throttle cable mount by handle bar.
Length:
Outer Sleave: 28.5 inches
Cable Pull Length: 2.75 inches
Overall cable length: 33.5 inches
|
Universal Throttle Cable
Black, 44" sheath length, 39.5" cable length. This is the replacement cable for our Full Twist Throttle setup, ensuring optimal performance.
|
Trailbuddy has reproduced the 1972-1974 CT70 Throttle Cable with Grey Sheathing. The overall length is 35 inches and the sheathed cable length is 31.25". Will fit: CT70 1972-1974
|
The cable you've been looking for! This is meant to work with most carburetors and the stock 1969-1974 CT70 throttle setup. Ideal for your larger aftermarket engine swap. Click more info for details.
|
Includes a rubber cap, two locknuts, cable adjuster and elbow tube. Replaces often damaged or missing cable adjusting elbows on Keihn and Mikuni carbs.
|
2in Longer Clone Throttle Cable twist in style.
Replacement throttle cable for the replicas bikes.
31" sheath and 35"cable length
This will only work with our TB026RC and/or TB026RCBL controllers and best with our Tall bars (TB197).
|
Outer Throttle Cable Holder for stock Honda setup. Will fit: CT70 1969-1974; and Z50A 1969-1978. It is #18 in the diagram.
This is a Right hand thread.
|
Reproduction throttle cable for a 1979-1981 CT70, Honda part number 17910-179-700 or 17910-126-720;Measurements:
Overall Length: 81cm
Throw Length: 10cm- 11cm
|
Universal twist throttle and cable assembly. The twist throttle is made of good, hard plastic with a black cast aluminum throttle housing and clamps on with two phillips head screws. You have an option for cable, which all depends on carb top style.
| | |
|
|