|
|
Cylinder Head
6mm Specialty Bolt between the Cylinder and the Cylinder Head
Fits most CT70's and Z50's
It is #10 in the diagram.
|
Oil Passage O-Ring in Cylinder Head see #10 in diagram.
Will fit most models.
|
8x12 Dowel Between the Head and Jug, also goes between the right crankcase cover and transmission case. It will fit on the CT70 1970-1994; ATC70 1973-74,1978-85; Z50A 1969-1978; Z50R 1979-1999. It is #11 and #19 in the diagrams.
|
Cylinder Gasket- one that goes between cylinder and transmission/engine. Great if you are just replacing the top end. #2 in diagram
CT70 1970-1994
Z50A 1969-1978
Z50R 1979-1993
ATC70 1973-1985
|
Ignition Wire Clip. It is #5 in diagram. Will fit CT70 1970-194; Z50R 1986-1987. Mounting bolt not included. Will need to reuse your original one or will need to find a M6x20 screw.
|
O-Ring/Rubber Gasket between Head and Jug. If you are doing just a top end, we recommend replacing it. Will fit many different models. It is #12 in the diagram.
|
Valve Stem Seal/ O-Ring. It is #6 in diagram.
Will fit:
CT70 1970-1981
Z50A 1969-1978
Z50R 1979-1981
ATC70 1974-1981
CT90 1966-1979
| | |
|
|