|
Genuine Honda replacement battery band (#15 in diagram). Fits CT70 (1970), CT70H (1971), and Z50A K1 (1970). See full description for measurements.
|
7 Amp Fuse for 6v Battery
125v
|
Top Engine Bolt for a replacement Ct70 (1970-1994)Honda Motor. This has the additional threads if you plan on reusing your stock canister air filter. If you are using a non-stock air filter please see TB129B as the correct bolt. This is #14 in schematic
|
This high-quality wire harness for the CT70 (1977-1979) is crafted to be as close to the original as possible. In fact, it’s virtually indistinguishable from the OEM harness. It features the same color-coded wires, sockets, and brass connectors.
|
MSRP: $64.99
Price: $50.82
You Save: $14.17 (22 %)
We designed a replacement OEM stock harness for the CT70 1980-1982 models. All original connections are there.
|
OEM Left Footpeg Kit CT70 1972-80
*Honda has discontinued the spring that this assembly needs- you will have to use your original one*
#12,16,25,and 27 in the diagram
****#17 has been discontinued.
|
MSRP: $104.95
Price: $93.34
You Save: $11.61 (11 %)
Reproduction CT70 Engine Cradle designed to use with the stock exhaust. Modifications maybe necessary if using aftermarket exhaust.
|
MSRP: $28.99
Price: $26.40
You Save: $2.59 (9 %)
This chrome electric horn features a mounting bracket for a stock look. It’s 6V, 63.5mm in diameter, and flat/open style. Mounting hardware not included, but a kit is available. Test the horn before mounting for proper adjustment.
|
Honda Grommet Wire Harness best to use with the stock harness.
Fits CT70 1970-1982 models.
This is #4 in the diagram.
|
MSRP: $16.99
Price: $13.75
You Save: $3.24 (19 %)
Unlike competitors, our Rear Brake Switch Sensor offers superior compatibility, easy installation with an extra male bullet connector, and works with both 12V & 6V systems. The best choice for CT70 models & replicas for reliable performance.
|
OEM Honda main/ignition switch with 2 keys. Fits CT70 (1972–1976). For use with stock 6V harness. Honda part, shown as #11 in the diagram.
|
Dimmer Switch Assembly for CT70 (1970-1972). Includes Hi/Low switch, new hardware, and black wire sheath. Typically mounts on the left handlebar. Item #4. Includes #30 and #28 (not pictured) in the diagram.
|
This plug was designed to go into the frame where there are two holes just above the side badge on the exhaust side. Will fit: CT70 1970-1982 and CT90 1972, 1974-79. It is #5 in the diagram.
|
Upgrade your CT70 with our footpeg bracket assembly featuring both a center and side stand for added stability. Fits most aftermarket engines. Note: Some engines may require spacers. See full description for mounting details and compatibility.
|
Chrome Frame Molding with mounting clips on the inside of the strip. This is the piece that covers the frame from the seat up to the triple tree area of the frame. With fit: CT70 1970-1994 and ST90 1973-1975. It is #8 in the diagram.
|
MSRP: $36.99
Price: $33.76
You Save: $3.23 (9 %)
CT70 Reproduction Harness 1974K3-1976 and some 1973/K2 Models
1973/K2 models that were released after May 1, 1973 will need this replacement harness. If your bike vin tag has a release date between January 1,1973-April 30, 1973, you will need TB305.
|
Honda 1969-1970/KO Wire Harness
Reproduction Wire Harness - Extremely nice and as close to the original as possible. Has the same color coded wires, sockets and brass connectors. Just plug it all in and you are set.
|
1972/K1/HK1 or a 1973(K2- only for bikes released between January 1973-April 1973) reproduction harness. All connections for your bike. Please note the specific note on the 1973/K2 model.
|
6V Relay Flasher for CT70 1974-1982 and CT90 1975-1979. This is the electrical component that makes the blinkers function properly. It is #17 in the diagram.
|
Replacement two prong 6v silicon rectifier for the stock CT70 1974(K3)-1982. It is used in other Honda machines for more recent years. It is #3 in the diagram.
|
MSRP: $135.99
Price: $102.96
You Save: $33.03 (24 %)
CT70KO & CT70HKO Main Switch/Ignition switch. Comes with two keys (rubber key caps have been discontinued from Honda) and correct wire connections to stock 6v harness. Stock replacement part ONLY. It is #8 in the diagram.
|
Wire Harness Clip/Guide helps keep your wire harness snug against the frame. Will fit CT70 1970-1979 and ST90 1973-1975. It is #7 in the diagram. Mounting hardware not included.
|
Replacement amber turn signal lens. Hardware not included.
|
MSRP: $21.99
Price: $15.29
You Save: $6.70 (30 %)
Reproduction Rectifier/Regulator for Z50AK1; CT70 K0-K2 (1969-1973); SL70 K0-K1.
It is #3 on the diagram.
|
Replacement Rubber Frame Lid/Battery Cover. Designed to mount on a CT70 1970-1973 and a ST90 1973-1975. It is number 15 in the diagram.
|
Frame Grommet that mounts in the rear of the frame. You will feed the taillight wires through this. It is #3 in the diagram. Will fit CT70 1970-1979; Z50A 1970-71 (K1-K2), and CT90 1966.
|
Turn signal and horn switch meant to replace the OEM switches from the later 1972-1974 models.
|
OEM Right Footpeg Kit CT70 1972-80
#12,14,15,25,and 27 in the diagram
|
OEM Replacement Rubber Side Stand Kit for the CT70's 1975-1980
The kit includes #9,10,23, and 20 in the diagram.
|