Please note that not all electrical items are plug and play UNLESS you purchase all your electrical components from us and not use any stock Ice Bear electrical.
This is an aftermarket handlebar controller setup. This is a stock replacement for the reproduction bikes but can be installed on stock bikes with modifications. Please see the full web description for what is on each controller and fitment descriptions
|
MSRP: $29.70
Price: $19.25
You Save: $10.45 (35 %)
Must have for those 12v Conversions! Will fit both our 12v Parts Unlimited, and BS battery. This is NOT designed for the 6v batteries and will not work for the stock 6v batteries.
Measures 5x3 inches.
|
Price: From $79.99 to $92.24
We designed this harness to work with all our electrical components to make it a truly trouble free harness with plug and play. This is a generic 12v harness and may come with additional connections that you may or may not use. See full web for more.
|
Price: From $230.38 to $266.68
This is a Basic wiring kit for installing a 12v aftermarket Engine. Comes w/ most of the necessary electrical components to get your classic trail 70 running w/ an aftermarket engine that you would not have received with your engine. See full description.
|
MSRP: $44.89
Price: $35.99
You Save: $8.90 (20 %)
This is a 12v speedometer that will work in the 12v headlight/speedometer bucket. Please see the full web description for more fitment guidelines. This product is designed to plug directly into our 12v Labeled Harness, part number TB160
|
Price: From $4.24 to $9.63
We've assembled small kits of connectors and pins commonly used in our shop. These kits work with 18-22 gauge wire.
For easy storage and organization, check out this handy option: Small 6-Compartment Box.
|
Price: From $89.59 to $123.78
Reproduction Style KO/1969-1971 Taillight Assembly- it will NOT come assembled.
The taillight has screws on the back that will be used to install onto the bracket.
Drop down option to choose to purchase with with or without mounting hardware
|
This wiring harness is perfect for your custom build using generic handlebar controls w/ no multi pinned plastic style connectors only bullet style. It is a complete main wiring harness and installs easily for a clean, custom look. See full web for more.
|
12V ignition coil with bullet/spade connectors for versatile use in 12V applications. Not compatible with our harnesses, it’s ideal for custom wiring solutions, offering reliable performance and durability for DIY projects.
|
MSRP: $69.95
Price: $48.40
You Save: $21.55 (31 %)
Scratch and Dent K0 (1969-1971) Replica Taillight Bracket, non-returnable and non-refundable. Please see further pictures for examples. These are meant to take the place of the original bracket without loosing looks or functionality.
|
MSRP: $95.95
Price: $77.99
You Save: $17.96 (19 %)
Maintenance free
Acid pack included for initial filling
Upright installation only
Completely sealed after filling
Superior power & extended cycle life
No need to be recharged while stocked
Suitable for cold weather
Reduction of plate sulfation
|
LED Headlight Bulb for TB056, TB317, TB298. Upgrade your lighting with superior brightness, energy efficiency, and durability. Works with 12V DC systems. All our engines use full-wave regulators. See full description for compatibility details.
|
MSRP: $43.00
Price: $30.25
You Save: $12.75 (30 %)
DOES NOT FIT STOCK CT70 BUCKET. Replacement 12v headlight for clones comes w/ mounting bolts. Will fit our LARGER CLONE black headlight bucket (TB080). It is a 5 3/4 diameter unit with a chrome ring. See full web description for wiring functions.
|
Metal headlight bucket for reproduction bikes or modified stock bikes. Not a direct replacement for stock CT70's. This unit is the one that holds the headlight and speedometer. Please see "More Info" for specific fitment notes.
|
MSRP: $3.95
Price: $3.50
You Save: $0.45 (11 %)
12v Clone Replacement Headlight Bulb- J Style
35/35W, PRIMARY USAGE: Headlight, QTY: 1
Dual Filament
WILL NOT FIT OEM SIZE HEADLIGHT UNIT
Please see full description for shipping notes.
|
MSRP: $9.50
Price: $7.33
You Save: $2.17 (23 %)
Replacement Battery Band for Hondas and the Replicas. The new design is a little bit longer and has a rubber loop on the top to help cushion the battery. The band measures at 4.5 inches end to end.
|
MSRP: $42.00
Price: $38.99
You Save: $3.01 (7 %)
This replacement lock assembly will mount into the stock CT70 frames. There are additional parts included for the clone frames. Please see the full description for fitment and product installation guides.
|
MSRP: $16.99
Price: $13.75
You Save: $3.24 (19 %)
Unlike competitors, our Rear Brake Switch Sensor offers superior compatibility, easy installation with an extra male bullet connector, and works with both 12V & 6V systems. The best choice for CT70 models & replicas for reliable performance.
|
MSRP: $32.50
Price: $28.44
You Save: $4.06 (12 %)
12v Half-Wave Rectifier/Regulator Assembly with a 4 pin connector. This will not work with our engines but if you purchased an engine elsewhere that is a half-wave stator output and need a regulator/rectifier, we got you covered.
|
5 pin CDI (capacitor discharge ignition) fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, & mopeds. Many engines require this CDI, including 50cc to 140cc. Verify the number of pins and style of plug of your CDI before you place order.
|
Upgrade your ignition system with this 12V Ignition Coil Assembly featuring plug connections for easy installation. Direct replacement for coils supplied with our engines, with a metal spark plug cover and sturdy construction for reliable performance.
|
MSRP: $27.96
Price: $26.02
You Save: $1.94 (7 %)
12v Relay Turn Signal for replica bikes or stock bikes with aftermarket 12v systems. If you are using this on a stock harness with our tandem, you will need to use the included wire harness connector & re-pin the wire connection on the STOCK harness.
|
MSRP: $126.95
Price: $119.99
You Save: $6.96 (5 %)
feature turn signal w/right,left ,& enter-push canceling; headlight w/ high-low beam; headlight off, parking and on settings and horn,comes with a kill switch & LED high beam indicator light. Fit 7/8” handlebars& 25” overall wire length w/ 9-pin connector
|
Replacement Left controller for the reproductions bikes. Controls Include: Horn, Choke, Hi Lo Beam, and Blinkers. Please see full website for cable recommendations.
|
This is an aftermarket controller assembly for any 7/8th handlebar& has more functions than a stock CT70. This is not a direct replacement for any stock CT70's. Product details and fitment suggestions in full description. THROTTLE CABLE NOW INCLUDED!
|
Price: From $5.80 to $30.90
Pre-assembled terminal kits from Shindy. Includes male/female connectors (30 each), dual female connectors (10), and 6mm, 8mm, and 10mm eyelet sets (5 each) with matching plastic sleeves for reliable electrical connections.
|
MSRP: $10.99
Price: $6.59
You Save: $4.40 (40 %)
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
|
MSRP: $24.95
Price: $22.12
You Save: $2.83 (11 %)
Ultra-mini eye shape, chrome housing, amber lens. Dimensions: 1-7/8" L x 1-1/8" W. Includes 12V incandescent bulb (single filament). Fits all CT70s with blinker capabilities and 12V systems. Not DOT approved.
Comes in a pair.
|
Enhance visibility with our Mini Blinker. This compact, 3" x 1-1/2" light features a vibrant amber lens, durable black housing, and a single 12V incandescent bulb. Easy two-wire installation makes it perfect for front or rear mounting. Sold in pairs.
|
MSRP: $36.78
Price: $23.99
You Save: $12.79 (35 %)
Old Style Tail Light- KO style with red lens with a 12v bulb. Includes the screws to mount onto the taillight bracket. It comes standard with a 12v taillight bulb however the bulb is changeable to a 6v to use on your stock CT70/Z50.
|