Replacement 70cc insulator for connecting the intake to the carburetor on Honda CT70 (1970-1977) and ATC70 (1973-1974). This essential part ensures a proper seal for optimal engine performance. Refer to #9 in the diagram for identification.
|
|
Unique five-rib insulator reduces flashover and decreases voltage loss
Dual copper and glass seal bonds the center electrode and insulator together for a gas-tight seal.
|
Season-long plug #4194
Combines quality and performance
Engineered to meet or exceed OEM specifications
|
MSRP: $14.95
Price: $13.95
You Save: $1.00 (7 %)
The iridium electrodes of these plugs can be shrunk to only 0.4mm, voltage requirements decrease while firing performance improves Ground electrode features a tapered cut and U-groove that form a large volume area for the flame's center
|
OEM IN PIPE GASKET #11 in diagram. Will fit your stock CT70 setup for years 1970-1977. Will also work on ATC70, TRX70, TRX125,SL70,S65, XL70 and CL70- please see full website for these fitment years. Also sold in an assembly.
|
Top-quality neoprene spark plug cap with spring connector
Each wire assembly has 7mm x 18" L Hypalon® wire attached
|
Replacement Left Cylinder Head Cover. Will fit: CT70 1970-1979; Z50A 1969-1978; Z50RD 1986; ATC70 1973-1974, 1978-1985; TRX70 1986-87; CL70 1969-1972; SL70 1971 and 1973; XL70 1973-1976. It is # 3 in diagram.
|
Valve Adjusting Cap Seal will work with most models of Honda's. It is #15 in the diagram. If you purchase a new valve adjusting cap and you do not purchase an engine gasket set (PUVG-112) you will need to purchase this seal.
|
The OEM Insulator Gasket fits stock CT70 70cc models from 1970-1977, including H models, and is compatible with 1973-1974 ATC70. Refer to #8 in the diagram for easy identification, ensuring a reliable seal for optimal performance.
|
Right Cylinder Gasket fits most CT70, Z50 and ATC70 models. It is number #6 on the diagram.
|
Acorn Nut Bolt for Air Filter Bolt/Cylinder Head Cover
Will fit:
CT70 1970-1994
CT90 1966
Z50A 1969-1978
Z50R 1979-1988
ATC70 1973-1974, 1978-1985
|
Cylinder Head Cover Gasket will fit your stock Ct70 setup from 1970-1994, Z50 from 1969-1997. It is #5 in the diagram. This gasket will also fit the TRX and ATC models, please see the full website for these fitment cc's and years.
|
Left Cylinder Head Side Cover Gasket. Will fit CT70 1970-1994; ATC70 1973-1974, 1978-1985; Z50A 1969-1978; Z50R 1979-1999. #7 in diagram.
|
This is a replacement insulator that connects the intake manifold to the carburetor.
This will fit:
CT70 1978-1981
ATC70 1978-1985
TRX70 1986-1987
This is #9 in the diagram.
|
This is a replacement insulator gasket that connects the intake manifold to the carburetor.
This will fit:
CT70 1978-1981
ATC70 1978-1985
TRX70 1986-1987
It is #8 in the diagram.
|
Designed to fit JIS cross-head screws used on Hondas
JIS bits are a must-have for most Japanese-made products and work equally well on traditional Philips-head screws
Use of traditional Philips driver on JIS cross-head screws will damage screw head
|
Designed to fit JIS cross-head screws used on Honda motors
JIS bits are a must-have for most Japanese-made products and work equally well on traditional Philips-head screws
Use of traditional Philips driver on JIS crosshead screws will damage screw head
|
Dowel Pin (8x14) CT70 1980+ Models
Dowel for Cylinder
This is #18 in the schematic.
|
Replacement spark plug cap
Adaptable thread size
5k Ohm
Allowable wire diameter 7 mm-8 mm
|