MSRP: $45.50
Price: $20.15
You Save: $25.35 (56 %)
CT70 CARB 18mm-PRICE REDUCTION!!!!!!! We are liquidating this style.
This is a non-returnable/non-refundable item.
|
MSRP: $65.00
Price: $45.15
You Save: $19.85 (31 %)
CT70 MIKUNI CARB TYPE 3, 25mm- please see full website version for a detailed specifications and air filter recommendations.
|
Replacement Honda Hitachi Condenser. It will fit: CT70 1970-1982; Z50A 1969-1978; Z50R 1979-1987; ATC70 1973-1974, 1978-1984; SL70K1 1973; XL70 1974-1976; XL75 1977-1979; XL80 1980-85; and XR75 1973-75. This is #4 in the diagram.
|
Cam Chain Guide Roller Pin- #10 in the diagram.
Will fit most CT70's, Z50's, ATC's- please see full website for all years and vin numbers.
|
MSRP: $26.95
Price: $19.95
You Save: $7.00 (26 %)
Vesrah® friction disc sets are manufactured from top-grade materials that meet or exceed OEM standards
Each disc set includes 3 friction plates only. Will fit several models/years. See full website for all models/years.
|
OEM Insoul Gasket will fit your stock CT70 70cc setup for years 1970-1977 including the H models. #8 in diagram. It also fits 1973-1974 ATC70.
|
Valve Adjusting Cap Seal will work with most models of Honda's. It is #15 in the diagram. If you purchase a new valve adjusting cap and you do not purchase an engine gasket set (PUVG-112) you will need to purchase this seal.
|
Right Cylinder Gasket fits most CT70, Z50 and ATC70 models. It is number #6 on the diagram.
|
MSRP: $13.76
Price: $11.70
You Save: $2.06 (15 %)
Engine Bolts for the Head Side Cover- includes 2 20mm bolts (#19); 2 copper flat washers (#14); 3 Acorn Nuts (#21); 3 6mm flat washers (#13) and 1 6mm Hex nut (#20)- please see full website for placement diagram.
|
Premium-quality 3/16th fuel line pre-bagged into 3' sections,stronger & more durable than vinyl fuel line,use w/ any type of gasoline,resistant to swelling, direct sunlight,hardening and/or cracking, stretches easily over petcocks/fitting
|
Clone Clutch Cable for the YX140cc motor. Mounts into the YX140 (TB278) & will work w/ our controller (TB026LH). It will be too short if you use any of the other perches that we have on our website.
Housing sheath is 46 in ;Inner cable length is 49 1/4in
|
This is part of the clutch area on the right case side. It will fit CT70 1970-1994; CT90 1966, 1969-72, 74-79; Z50A 1969-1978; Z50R 1979-1999; ATC70 1973-1985; TRX70 1986-1987. Will fit other models. It is #10 in the diagram.
|
|
OEM Replacement Gear Shift Rubber
|
12mm Drain Plug Bolt-It is # 20 in diagram.
Will work with any engine that has a 12mm drain.
|
12mm Drain Plug Washer it is #18 in the diagram.
Will work on any engine that needs a 12mm washer in the drain plug area.
|
Stator Seal 6x1.7 (the small seals around the larger two)
#15 in the schematic.
|
Flywheel Key/Woodruff Key
|
Transmission Oil Seal 17x29x5
|
This is part of the clutch area on the right crankcase side. It will fit CT70 1970-1994; CT90 1966, 1969-72, 74-79; Z50A 1969-1978; Z50R 1979-1999; ATC70 1973-1985; TRX70 1986-1987. Will fit other models. It is #11 in the diagram.
|
Replacement 14mm Lock Washer for the clutch area. Will fit: CT70 1970-1994; Z50A 1976-1978; Z50R 1979-1999; SL70 1971,1973; XL70 1974-76; ATC70 1973-74,1978-1985; TRX70 1986-1987. It is #18 in the diagram.
|
MSRP: $17.26
Price: $16.28
You Save: $0.98 (6 %)
Heavy Duty Friction Clutch Plate Set For CT70 1969-1975
|
Outer Clutch Cover Gasket for your ATC70, CT70 and Z50. This is a single gasket. This is perfect if you are just working in the clutch area. If you are working on the entire engine- we recommend the PUVG-112 gasket set. This gasket is #3 in diagram.
|
R. Crankcase Cover gasket for your ATC70, CT70 and Z50. This is a single gasket. This is perfect if you are just working in the clutch area. If you are working on the entire engine- we recommend the PUVG-112 gasket set. It is #2 in diagram.
|
Replacement Oil Dipstick and Seal Kit for Stock Honda Motors from Honda. Includes brand new dipstick and seal, #15 and #3 in diagram. Fits most models- please see full web version for all fitment years.
|
Front Sprocket Drive Plate with Bolt Kit from Honda. Designed to hold the front sprocket in place. #9 and #16 in diagram. Please see full web version for specific year fitments.
|
Honda Cloud Silver Touch Up Paint- we use on all our restorations!
Net Weight 12oz/340g aerosol spray can
This is a haz mat item and will be shipped UPS to the 48 USA States. International we will email you for shipping options!
|
Oil Passage O-Ring in Cylinder Head see #10 in diagram.
Will fit most models.
|
O-Ring/Rubber Gasket between Head and Jug. If you are doing just a top end, we recommend replacing it. Will fit many different models. It is #12 in the diagram.
|
Replacement Gearshift Spindle. It is number 10 in diagram. Will fit:
CT70 1970-1982
Z50A 1969-1978
Z50R 1979-1987
ATC70 1973-74, 78-85
TRX70 1986-1987
ZB50 1988
|