|
|
Fenders
Designed & Manufactured by Trailbuddy Inc.the front high mount fender bracket is designed to mount on the bottom side of the triple tree (steering stem) to mount our TB229- High Mount Fender to the 30mm Fork Assemblies (TB149 or TB167) or your stock fork
|
Replacement Chrome Rear Fender. Will bolt on to all CT70 and replica frames. Does not have the rolled hem around the perimeter edge on the underside portion of the fender like the stock OEM fender had.
|
Our high mount fender is designed to fit the inverted forks but can be used on the 30mm fork kit or the stock forks with our TB426. This fender has pre-drilled holes for a front splash guard/mud flap. The cable guide holes are on the right side.
|
OEM Front Fender Cable Guide which mounts on the left side of a stock fender. This will also mount onto our aftermarket fenders, however, it will then need to be mounted on the right side of the fender. Will fit CT70 1970-1979. It is #4 in the diagram.
|
Plastic front fender/mud flap
|
Rear Fender Mounting Collar. Will fit: CT70 1970, CT70H 1971; Z50A 1972-1978; and ST90 1973-1975. It is #11 in the diagram.
|
Rear Fender Rubber Mounting Grommet for the taillight bracket and fender area. It will fit a CT70 1970-1971; and a Z50A 1972-1978. It is #10 in the diagram.
|
Replacement rear fender for the reproduction bikes
-This Part Will Fit-
All Replicas
| |
|
|