Mailing Lists

Search
Browse Categories

Frame/Engine Accessories

Displaying products 1 - 21 of 21 results
YX140cc Replacement Engine Seal Kit
Price: $12.00
YX140cc Replacement Engine Seal Kit
Replacement Engine Seal Kit for the 140cc YX motor that we carry.
Front Fork Boots for Z50 1969-1978, Ct70 1970-71 no chrome ring
Price: $21.05
Front Fork Boots for Z50 1969-1978, Ct70 1970-71 no chrome ring
Front Fork Boots for Z50A 1969-1978, CT70 1970-71 You will need to reuse your original chrome ring. Sold individually. Will fit: Z50A 1969-1978 CT70 1970-1971 It is #9 in the diagram.
Trailbuddy Replacement Footpeg Assembly Spring Kit
MSRP: $9.00
Price: $6.80
You Save: $2.20 (24 %)
Trailbuddy Replacement Footpeg Assembly Spring Kit
This spring kit contains all the springs and rubber cushion you would need to replace on our footpeg assembly (TB148 http://mytrailbuddystore.com/footpegbracketassembly.aspx).
CT70 Brake Lever by Trail Buddy
Price: From $29.88 to $34.92
CT70 Brake Lever by Trail Buddy
CT70 Brake Lever by Trail Buddy with Bronze Sleeve Bearing. This assembly is used to adapt the clone brake lever to an original Honda frame. The kit for 1969-1979 model years will require a spacer kit (TB063) that is included with TB254A.
CT70 Seat Bracket/Hinge-Upper Portion
Price: $8.80
CT70 Seat Bracket/Hinge-Upper Portion
CT70 Seat bracket/Hinge B for the front of the seat. Will fit CT70 1970-1994. The main seat hinge pin is discontinued from Honda- we recommend reusing your original pin. You will also need a 6mm hex nut and 6mm flat washer. It is #4 in diagram.
Frame Grommet for Taillight Wires
Price: $2.68
Frame Grommet for Taillight Wires
Frame Grommet that mounts in the rear of the frame. You will feed the taillight wires through this. It is #3 in the diagram. Will fit CT70 1970-1979; Z50A 1970-71 (K1-K2), and CT90 1966.
Z50A Replacement Taillight Lens
Price: $15.45
Z50A Replacement Taillight Lens
This replacement taillight lens is designed to fit Z50A 1972-1978. This will work for a CT70 taillight it however is missing the indentation in the lens (see the highlighted diagram). This is #3 in the diagram.
125cc Zongshen Replacement Engine Seal Kit
Price: $12.00
125cc Zongshen Replacement Engine Seal Kit
125cc Zongshen Replacement Engine Seal Kit
125cc Lifan Replacement Seals
Price: $12.00
125cc Lifan Replacement Seals
We created a replacement seal kit for the aftermarket 125cc Lifan engines.
Kickstarter Arm/Lever
Price: $55.00
Kickstarter Arm/Lever
Brand New Kickstarter Arm/Lever this part doesn't include a new kickstart rubber. Will Fit: CT70 1970-1979 Z50A 1969-1971 CT90 1969-1976 It is #6 in diagram.
Wire Harness Clip
Price: $3.60
Wire Harness Clip
Wire Harness Clip/Guide helps keep your wire harness snug against the frame. Will fit CT70 1970-1979 and ST90 1973-1975. It is #7 in the diagram. Mounting hardware not included.
ENGINE OIL MAGNETIC BOLT
Price: $4.80
ENGINE OIL MAGNETIC BOLT
ENGINE OIL MAGNETIC BOLT
Wire Frame Clamp
MSRP: $8.00
Price: $6.05
You Save: $1.95 (24 %)
Wire Frame Clamp
Wire Frame Clamp Holds the wires going from the frame to the headlight bucket
CHROME FRAME MOLDING WITH CLIP
Price: $12.50
CHROME FRAME MOLDING WITH CLIP
Chrome Frame Molding with mounting clips on the inside of the strip. This is the piece that covers the frame from the seat up to the triple tree area of the frame. With fit: CT70 1970-1994 and ST90 1973-1975. It is #8 in the diagram.
WIRE HARNESS RUBBER/GROMMET CLONE
Price: $3.05
WIRE HARNESS RUBBER/GROMMET CLONE
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
UNI FILTER SKID PLATE FOAM
Price: $15.95
UNI FILTER SKID PLATE FOAM
UNI FILTER SKID PLATE FOAM Thick, very coarse foam keeps mud and grime from packing between engine and skid plate and allows water to drain away Foam block is 8" x 10" x 2" thick Trim to fit any application Made in the U.S.A.
Alloy Skid Plate
Price: $30.00
Alloy Skid Plate
Aluminum skid plate for clone engines available for a kickstart or electric start motor. The total length is 12 7/8 in and 5.5 in wide and the curve up starts at 8.5 inches. The mounting spaces are at 4 1/4 wide
Footpeg Bracket Assembly
MSRP: $60.00
Price: $52.00
You Save: $8.00 (13 %)
Footpeg Bracket Assembly
Footpeg Bracket Assembly- this will NOT fit as a replacement footpeg assembly for the stock 70cc motors.This is highly recommended for any aftermarket engine with the same mounting bolt pattern as stock CT70 engines. See full web for fitment dimensions.
Engine Ornamentation S/D
MSRP: $45.00
Price: $25.00
You Save: $20.00 (44 %)
Engine Ornamentation S/D
Engine Ornamentation No o-rings or gaskets We are liquidating this item. There is nothing wrong with them just not a big seller. No returns/no warranty.
Grommet Wire Harness
Price: $4.75
Grommet Wire Harness
Honda Grommet Wire Harness best to use with the stock harness. Fits CT70 1970-1982 models. This is #4 in the diagram.
Maxima SC1 Clear Coat
Price: $10.50
Maxima SC1 Clear Coat
Restore the factory shine with a superior detailer specifically formulated for the powersports industry Cleans, polishes and conditions plastic, fiberglass and painted surfaces Also effective as a light lubricant for cables and levers 12oz. cans