We have kitted up a replacement fuel tank rubber kit that will hold on your tank to your frame. This is designed for the Z50A 1969-1971 (K0-K2) models. It will come with one large pad, large tank strap and two slotted stoppers.
|
Two-part kit dissolves rust, etches the metal and removes oil and grease.Treatment time is approximately four hours
Kit includes Prep A, 8 fl. oz. Prep B; enough for 21/2-gal. tank We recommend then using the Kreem Liner to finish off the process.
|
Z50A Gas Tank Decal set for the 1973/K4 model. Our decals are made from vinyl with dual layers, we use a thin protective over laminate. All decals have an extra layer of film to make them waterproof and clear-coated so the color won’t run.
|
Z50A Gas Tank Decal set for the 1973/K4 model. Our decals are made from vinyl with dual layers, we use a thin protective over laminate. All decals have an extra layer of film to make them waterproof and clear-coated so the color won’t run.
|
Price: Back Ordered NO ETA
Original Honda Metal Non-:Locking Gas Cap will fit:
CT70 1972-1979 (HK1, K1, K2, K3 and K4 model years)
Z50A 1969-1978 (K1-K5
ATC70 1975-1985
TRX70 1986-1987
|
Z50 Gas Tank Rubber for the back of the gas tank. Number #18 in diagram. Will not work with Clone tanks. For Z50A 1969-1971 and QA50 1971-1975.
|
Premium-quality 3/16th fuel line pre-bagged into 3' sections,stronger & more durable than vinyl fuel line,use w/ any type of gasoline,resistant to swelling, direct sunlight,hardening and/or cracking, stretches easily over petcocks/fitting
|
Replacement fully assembled Z50 Fuel Petcock. Will not work with clone tanks. Will fit: Z50A 1969-1978; QA50 1971-1975; MR50 1974-1975; P50 1968 and a PC50 1970. It is #1 in the diagram.
|
STEEL FUEL TANK LINER -In a new or old tank, Kreem will seal and protect, prevent rust and stop leaks from pinholes and hairline cracks. Resistant to alcohol and gasohol;withstands most octane boosters. Most tanks require one pint of Kreem per 3 gallons
|
3" of Black Fuel Line nice flexible rubber 3/16th fuel line. The rubber lines work the best with the plastic tanks.
|
Front Gas Tank Rubber for Z50R 1979-1987 and ATC70 1978-1985. Sold individually. These are the larger rubber mounts for the front of the tank. It is #7 in the diagram.
|
3/16th -1/4th Clear Fuel Filter. It is 3 1/8th inches long. It has a larger fuel flow.
|
Universal 3/16th Black Fuel Line. This comes in a coil of 25', so you can use on more than one project! Please note that this is fuel line is not for use with fuel containing more than 10% alcohol.
|
Replacement Oil Dipstick O-Ring. Will fit most ATC70, CT70, Z50A and Z50R's. It is # 15 in diagram. If you are looking for a new dipstick please check out the recommended products for a new dipstick kit.
|
1972-1987 Z50A/Z50R Fuel Tank Rubber. This is the rear large rubber gasket that the tank sets on. It is #11 in the diagram. Will NOT work with Clone tanks. Will fit Z50A 1972-1978, Z50R 1979-1999, ATC70 1978-1985.
|
Z50A Front Circular Gas Tank Rubbers. #17 in diagram. These are sold individually and will NOT work with clone tanks. Will fit Z50A 1970-1978, ATC70 1973-1974, QA50 1971-1975.
|
FUEL STABILIZER-Allows storing without draining fuel,Prevents gum and varnish formation, Cleans carbs and internal engine parts,Absorbs moisture in fuel system
Extends spark plug life by reducing fouling and misfiring
Use 1 oz. per gallon of fuel 12 oz
|
Z50A and Z50AK1 gas tank rubber for the front of the gas tank. This is #17 in the diagram. These are sold individually. Will fit the Z50A 1969-1970.
|
|
|
|
MSRP: $19.75
Price: $16.50
You Save: $3.25 (16 %)
Universal Fuel Tank Switch, on/off/res petcock.
We usually mount where the stock CT70 air filter tab is.
|
|
| | |