STEEL FUEL TANK LINER -In a new or old tank, Kreem will seal and protect, prevent rust and stop leaks from pinholes and hairline cracks. Resistant to alcohol and gasohol;withstands most octane boosters. Most tanks require one pint of Kreem per 3 gallons
|
MSRP: $173.98
Price: $156.58
You Save: $17.40 (10 %)
Fuel System Kit includes tank, gas cap, fuel switch, lines, filter, tank cover and the gas rubber set. Please see full web description for more detailed information.
|
Premium-quality 3/16th fuel line pre-bagged into 3' sections,stronger & more durable than vinyl fuel line,use w/ any type of gasoline,resistant to swelling, direct sunlight,hardening and/or cracking, stretches easily over petcocks/fitting
|
Original Honda Metal Non-:Locking Gas Cap will fit:
CT70 1972-1979 (HK1, K1, K2, K3 and K4 model years)
Z50A 1969-1978 (K1-K5
ATC70 1975-1985
TRX70 1986-1987
|
MSRP: $9.50
Price: $6.50
You Save: $3.00 (32 %)
Clone CT70 Fuel Tank Rubbers these are meant to mount onto the clone frames but can be modified by the customer to work on your build. Sold as a set.
|
Two-part kit dissolves rust, etches the metal and removes oil and grease.Treatment time is approximately four hours
Kit includes Prep A, 8 fl. oz. Prep B; enough for 21/2-gal. tank We recommend then using the Kreem Liner to finish off the process.
|
MSRP: $28.99
Price: $23.50
You Save: $5.49 (19 %)
CT70 Plastic Fuel Tank Rubber Replacement Kit for our brand new plastic fuel tank or if you need to replace your old stock rubber kit on your plastic fuel tank.
|
MSRP: $275.00
Price: $199.99
You Save: $75.01 (27 %)
Trailbuddy Inc. has manufactured stamped steel frame halves to hang on your wall! These steel frame pieces are a great decoration of the Honda CT70 for the hardcore mini trail nut! New Year, New Price!
Free Shipping, the additional fee is for shipping IN
|
Price: From $20.25 to $23.25
Beefy Hanes T-Shirt with the Classic CT70 bike design.
Ultra-soft premium 100% cotton feels great against your skin. *Please note that it shrinks about a half-inch to an inch after washing.*
Non-chafe fabric taping reinforces neck & shoulders.
|
Replacement Fuel Cap for the PLASTIC tank. It is #10 in the diagram. It will fit CT70 1970-1972 (KO, HKO and HK1)
|
2.4 Liter Gas Steel Tank with 2 inlets. If you have a metal tank- your current gas cap will work (as long as it is not damaged) if you are upgrading your plastic tank to this one you will need a gas cap. Please see TB059 for purchase.
|
Replacement Oil Dipstick O-Ring. Will fit most ATC70, CT70, Z50A and Z50R's. It is # 15 in diagram. If you are looking for a new dipstick please check out the recommended products for a new dipstick kit.
|
FUEL STABILIZER-Allows storing without draining fuel,Prevents gum and varnish formation, Cleans carbs and internal engine parts,Absorbs moisture in fuel system
Extends spark plug life by reducing fouling and misfiring
Use 1 oz. per gallon of fuel 12 oz
|
MSRP: $5.95
Price: $5.35
You Save: $0.60 (10 %)
3/16 INLINE FUEL FILTER-
|
MSRP: $26.99
Price: $21.75
You Save: $5.24 (19 %)
Universal Fuel Tank Switch, on/off/res petcock.
We usually mount where the stock CT70 air filter tab is.
Mounting bolts are included.
|
MSRP: $34.99
Price: $29.99
You Save: $5.00 (14 %)
This is a replacement fuel / gas tank cover bracket for the most clone bikes. Will not work with any stock gas tank without modifications.
Metal with a black finish.
|
This is a rubber set for the steel replacement gas tank for the classic trail 70 and reproduction bikes.
1-Larg Rubber Ring for Gas Tank to Frame
2-Small Pads/Fame Pads
1-Small Rubber Ring
Does not include a gas cap.
|
Top-of-the-line U.S.-made fuel line will not harden or crack
Fuel line available in 3/16" i.d.
Clear Color
Fuel line available in 3' lengths
|
3/16" 25 FOOT ROLL BLUE POLYURETHANE FUEL LINE. High tensile strength; withstands temps from -65°F to 220°F w/o deterioration., kink-& abrasion-resistant, transparent blue polyurethane line w/ exceptional chemical resistance including gas/grease/oil.
|
3/16" 3 FOOT ROLL BLUE POLYURETHANE FUEL LINE. High tensile strength; withstands temps from -65°F to 220°F w/o deterioration., kink-& abrasion-resistant, transparent blue polyurethane line w/ exceptional chemical resistance including gas/grease/oil.
|
MSRP: $34.99
Price: $24.99
You Save: $10.00 (29 %)
SCRATCH AND DENT PART, NON RETURNABLE, NON REFUNDABLE and NO WARRANTY. Missing a bit of paint from the factory. This is a replacement fuel / gas tank cover bracket for the most clone bikes. Will not work with any stock gas tank without modifications.
|
Price: From $20.25 to $23.25
We are LOVING our new design for a t-shirt! Made of a 50/50 cotton/polyester material with a 1x1 rib knit collar. Get yours today!
|
Price: From $1.72 to $15.41
C Clips for tank lines-sold in packs of 10
Fits most Honda models beyond the CT70's and Z50's.
#25 in the diagram.
|
Replacement Gas Cap Gasket for CT70's 1972-1982; 1991-1994; Z50As 1971-78; Z50R 1979-1987. It is the gasket that inserts into the actual gas cap. It is #5 in the diagram.
|
3/16th -1/4th Clear Fuel Filter. It is 3 1/8th inches long. It has a larger fuel flow.
|
Fuel Tank Pad. Sold individually. Will fit CT70 1972-1994 and ST90 1973-1975. It is #3 in the diagram.
|
Stock Gas Tank Gasket. Will fit the CT70 1972-1994.
It is # in the diagram.
|
MSRP: $79.95
Price: $75.95
You Save: $4.00 (5 %)
Brand new CT70 2.4 Plastic fuel tank replicated after the stock Honda plastic tank from 1969-1971 K0/HK0 models. Two fuel outlets & sold without a gas cap. You can reuse your stock OEM plastic gas cap or purchase a new one. See full description for more
|
3' of Black Fuel Line nice flexible rubber 3/16th fuel line. The rubber lines work the best with the plastic tanks.
Reinforced line is fuel- and oil-resistant
Do not use with fuel containing more than 10% alcohol.
|
Price: From $19.99 to $22.99
Ultra-soft premium 100% cotton feels great against your skin.
Non-chafe fabric taping reinforces neck & shoulders.
Lay Flat collar keeps its shape wash after wash.
Durable double stitching trims sleeves and bottom hem.
Full cut provides roomier fit.
|