2.4 Liter Gas Steel Tank with 2 inlets. If you have a metal tank- your current gas cap will work (as long as it is not damaged) if you are upgrading your plastic tank to this one you will need a gas cap. Please see TB059 for purchase.
|
3' of Black Fuel Line nice flexible rubber 3/16th fuel line. The rubber lines work the best with the plastic tanks.
Reinforced line is fuel- and oil-resistant
Do not use with fuel containing more than 10% alcohol.
|
MSRP: $5.95
Price: $5.35
You Save: $0.60 (10 %)
3/16 INLINE FUEL FILTER-
|
3/16" 25 FOOT ROLL BLUE POLYURETHANE FUEL LINE. High tensile strength; withstands temps from -65°F to 220°F w/o deterioration., kink-& abrasion-resistant, transparent blue polyurethane line w/ exceptional chemical resistance including gas/grease/oil.
|
3/16th -1/4th Clear Fuel Filter. It is 3 1/8th inches long. It has a larger fuel flow.
|
Premium-quality 3/16th fuel line pre-bagged into 3' sections,stronger & more durable than vinyl fuel line,use w/ any type of gasoline,resistant to swelling, direct sunlight,hardening and/or cracking, stretches easily over petcocks/fitting
|
MSRP: $9.50
Price: $6.50
You Save: $3.00 (32 %)
Clone CT70 Fuel Tank Rubbers these are meant to mount onto the clone frames but can be modified by the customer to work on your build. Sold as a set.
|
This is a rubber set for the steel replacement gas tank for the classic trail 70 and reproduction bikes.
1-Larg Rubber Ring for Gas Tank to Frame
2-Small Pads/Fame Pads
1-Small Rubber Ring
Does not include a gas cap.
|
MSRP: $34.99
Price: $25.00
You Save: $9.99 (29 %)
This is a replacement fuel / gas tank cover bracket for the most clone bikes. Will not work with any stock gas tank without modifications.
Metal with a black finish.
|
MSRP: $176.08
Price: $158.47
You Save: $17.61 (10 %)
Fuel System Kit includes tank, gas cap, fuel switch, lines, filter, tank cover and the gas rubber set. Please see full web description for more detailed information.
|
FUEL STABILIZER-Allows storing without draining fuel,Prevents gum and varnish formation, Cleans carbs and internal engine parts,Absorbs moisture in fuel system
Extends spark plug life by reducing fouling and misfiring
Use 1 oz. per gallon of fuel 12 oz
|
Fuel Tank Pad. Sold individually. Will fit CT70 1972-1994 and ST90 1973-1975. It is #3 in the diagram.
|
MSRP: $26.99
Price: $14.50
You Save: $12.49 (46 %)
Universal Fuel Tank Switch, on/off/res petcock.
We usually mount where the stock CT70 air filter tab is, but has the ability to be mounted in multiple ways.
Mounting bolts are included.
|
Rubber gas tank neck grommet for steel gas tanks. This will not fit on a stock CT70 plastic nor stock CT70 metal tank.
-This Part Will Fit-
All Replicas
CT70 with the Clone steel tank
|
STEEL FUEL TANK LINER -In a new or old tank, Kreem will seal and protect, prevent rust and stop leaks from pinholes and hairline cracks. Resistant to alcohol and gasohol;withstands most octane boosters. Most tanks require one pint of Kreem per 3 gallons
|
Two-part kit dissolves rust, etches the metal and removes oil and grease.Treatment time is approximately four hours
Kit includes Prep A, 8 fl. oz. Prep B; enough for 21/2-gal. tank We recommend then using the Kreem Liner to finish off the process.
|
Original Honda Metal Non-:Locking Gas Cap will fit:
CT70 1972-1979 (HK1, K1, K2, K3 and K4 model years)
Z50A 1969-1978 (K1-K5
ATC70 1975-1985
TRX70 1986-1987
|
Replacement Fuel Cap for the PLASTIC tank. It is #10 in the diagram. It will fit CT70 1970-1972 (KO, HKO and HK1)
|
Replacement Oil Dipstick O-Ring. Will fit most ATC70, CT70, Z50A and Z50R's. It is # 15 in diagram. If you are looking for a new dipstick please check out the recommended products for a new dipstick kit.
|
Stock Gas Tank Gasket. Will fit the CT70 1972-1994.
It is # in the diagram.
|