Genuine Honda crankcase kick starter oil seal (#13 in diagram). Fits CT70, Z50, and other Honda mini bike engines. See full description for details.
|
Valve Adjusting Cap Seal will work with most models of Honda's. It is #15 in the diagram. If you purchase a new valve adjusting cap and you do not purchase an engine gasket set (PUVG-112) you will need to purchase this seal.
|
Replacement Rubber for the Kickstart lever.
Will fit:
CT70
Z50a
and many other models.
It is #10 in the diagram.
|
Right Cylinder Gasket fits most CT70, Z50 and ATC70 models. It is number #6 on the diagram.
|
Honda replacement stator seal 6x1.7 (the small seals around the bolts)
Fits Honda CT70 and Z50, will fit other models, just cross reference the numbers.
#17 in the schematic.
|
Outer Clutch Cover Gasket for your ATC70, CT70 and Z50. This is a single gasket. This is perfect if you are just working in the clutch area. If you are working on the entire engine- we recommend the PUVG-112 gasket set. This gasket is #3 in diagram.
|
R. Crankcase Cover gasket for your ATC70, CT70 and Z50. This is a single gasket. This is perfect if you are just working in the clutch area. If you are working on the entire engine- we recommend the PUVG-112 gasket set. It is #2 in diagram.
|
Replacement Oil Dipstick and Seal Kit for Stock Honda Motors from Honda. Includes brand new dipstick and seal, #15 and #3 in diagram. Fits most models- please see full web version for all fitment years.
|
Oil Passage O-Ring in Cylinder Head see #10 in diagram.
Will fit most models.
|
MSRP: $5.29
Price: $4.30
You Save: $0.99 (19 %)
OEM Exhaust Shield Screw and Paper Gasket for Honda CT70, Z50, and CT90. Includes 1 screw and 1 gasket (ref #20 and #6 in Honda diagram). Sold individually; quantity may vary based on make and model year. Ideal for maintenance and restoration.
|
|
VESRAH COMPLETE GASKET SET
|
Honda OEM Gearshift Oil Seal, diagram reference #20. Fits CT70 (1970–1982), Z50A, and Z50R models. See full description for full fitment details.
|
YX/Piranha 140cc Engine Gasket Set. The set contains all the essential gaskets, seals, and o-rings needed for a complete engine rebuild or repair. Please see the full description for all included parts.
|
Engine Gasket set for our Zongshen 125cc Motors.
Includes all pictured- has 4 valve seals (not all 4 are pictured)
|
Honda OEM Valve Stem Seal / O-Ring, diagram reference #6. Fits CT70, Z50A, Z50R, ATC70, and CT90 models. See full description for fitment years.
|
Cylinder Gasket- one that goes between cylinder and transmission/engine. Great if you are just replacing the top end. #2 in diagram
CT70 1970-1994
Z50A 1969-1978
Z50R 1979-1993
ATC70 1973-1985
|
Cylinder Head Cover Gasket will fit your stock Ct70 setup from 1970-1994, Z50 from 1969-1997. It is #5 in the diagram. This gasket will also fit the TRX and ATC models, please see the full website for these fitment cc's and years.
|
O-Ring For Right Crankcase Cover 8mm O-Ring. Will fit CT70 1970-1994, ATC70 1973-1985, Z50A 1969-1978, Z50R 1979-1999. It is #14 in the diagram.
|
Replacement Oil Dipstick O-Ring. Will fit most ATC70, CT70, Z50A and Z50R's. It is # 15 in diagram. If you are looking for a new dipstick please check out the recommended products for a new dipstick kit.
|
Left Cylinder Head Side Cover Gasket. Will fit CT70 1970-1994; ATC70 1973-1974, 1978-1985; Z50A 1969-1978; Z50R 1979-1999. #7 in diagram.
|
O-Ring Seal by Cam Chain Adjusting Bolt. Will fit: CT70 1972-1982; CT90 1966, 1969-1977; Z50A 1972-1978; and Z50R 1976-87.
It is #20 in the diagram.
|
Replacement gaskets, insulators and bolts for aftermarket motors. Not the 190cc's. It's highly recommended that you check the dimensions of your intake manifold and compare them to the measurements listed in the larger description.
|
|
|
MSRP: $15.99
Price: $12.09
You Save: $3.90 (24 %)
Replacement cap for the clutch adjuster on the left side of your aftermarket engine. Will fit our 125cc, 140cc, and 190cc engines. Comes with gasket.
| |