CT70 1975-1979 Replacement Front Brake Lever Original Honda Part # 53175-369-700
It is #10 in schematic.
Will Fit:
CT70 1975-1979
CT90 1975-1979
ST90 1973-1975
Other models also.
|
MSRP: $46.65
Price: $39.65
You Save: $7.00 (15 %)
Stock Throttle Rebuild Kit - all the parts you will need to rebuild a sloppy throttle setup, with a 10% discount. This kit does not include the throttle cable holder since that is included with a throttle cable. #'s 13,17,26 and 15 in diagram.
|
MSRP: $28.95
Price: $20.00
You Save: $8.95 (31 %)
We designed these replacement handlebar knobs to work with the stock Ct70/Z50 handlebar clamps. Even if you are using our tall bars but your stock clamp- these will work. Depending on your style top plate- you may or may not need a washer (not included).
|
OEM Handle Bar Pivot Screw and Hex Bolt Kit -includes both the pivot screw and the nut. It is #27 and #29 in the diagram.
Will Fit:
CT70 1970-1974
Z50A 1969-1978
|
Replacement Left Hand Grip. Firmer rubber to slide over the handlebar. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.
|
Replacement Right Hand Grip. Soft and flexible rubber to slide over the metal throttle pipe. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.#20 in the diagram.
|
Throttle Cable Grommet that mounts on the inside of the handlebars. It is #2 in the diagram. Will fit:
CT70 1970-1974; Z50A 1969-1978; CT90 1966, 1969-1972, 1974. Will also fit other Honda models.
|
THROTTLE GRIP MOUNT SCREW
Fits: Ct70 1970-1974, Z50A 1969-1975, QA50 1971-1975 and PC50 1970
|
Metal throttle grip pipe for stock Honda bars. Will fit CT70 1970-1974; Z50A 1969-1978; and P50 1968. It is #15 in the diagram.
|
Throttle Grip Stopper for stock Honda throttle setups. Will fit: CT70 1970-1973; Z50A 1969-1975; and P50 1968. It is #19 in the diagram.
|
5x25 Pan Screws For Late Model CT70's (1976-1979) Replacement Screws for the Turn Signal Switches (NLA). They are #16 in the diagram.
|
Turn signal and horn switch meant to replace the OEM switches from the later 1972-1974 models.
|
MSRP: $145.99
Price: $85.00
You Save: $60.99 (42 %)
Nice reproduction cast aluminum handlebar clamp for the 1969-1971 CT70 K0 spring loaded fork system. Same width as stock. Comes with the locking nuts and knobs.
|
Will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978; and QA50 1973-1974 (K1-K3) Left Grip. It is #19 in diagram.
|
Grip will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978 (K3-K6); and QA50 1973-1974 (K1-K3). It is # 18 in diagram.
|
Will fit most 7/8 bars but was designed for a CT70 1975 (K4)- 1978 and XL70 1974-1976 left grip. It is #9 in diagram.
|
Will fit most 7/8 bars but was designed for a CT70 1975 (K4)- 1978 and XL70 1974-1976 right grip. It is #8 in diagram.
|
Dimmer Switch Assembly for CT70 1970-1972. Controls the headlight unit. Typically mounts on the left handlebar. It is #4 in the diagram.
**We are unable to get just a replacement black switch- we can only get it as a whole unit***
|
Handlebar Pivot Screw/Nut Kit for CT70 1980-1982 and 1992-94 Models
Replaces the pivot screw that mounts the right lever (front brake) onto the controller.
It is number #16 and #20 in the diagram.
|
Late Model CT70 (1975-1979) Handle Lever Pivot Bolt Kit with Nut. It is #14 and #17 in the schematic.
|
Replacement Right Lever for the CT70 1980-1982 model and the Z50R 1986-1999 model. It will work on other Honda models, please cross reference the OEM part call out. It is #11 in the schematic.
|
Honda CT70's 1979-1982 handlebar riser kit. Each kit includes an upper handlebar holder, lower handlebar holder, two M6 flat washers, and two Honda 6x28 Hex Bolts. This kit will just replace one riser. #'s4,8,9,10,and 6 in the diagram.
|
OEM Fr. Brake Adjusting Bolt and Fixing Nut CT70's 1975-1979
It is numbers #1 & #15 in the diagram.
|
Outer Throttle Cable Holder for stock Honda setup. Will fit: CT70 1969-1974; and Z50A 1969-1978. It is #18 in the diagram.
This is a Right hand thread.
|
Pan screw 3x12- Dimmer Switch screw
|
Eliminates grips slipping and sliding in the heat of the action
A must when using medium- or soft-compound Renthal grips
Available in 25mL tubes
|
Replacement Front Brake Switch for Late Models CT70's (1977-1982). It is #4 in the diagram.
|
Replacement Left Lever for CT70 1970-1974; and ATC70 1973-1974, 1978-1983. It is #21 in diagram.
|
Right and Left replacement levers CT70 serial # up to 186004; Will fit most early CT70 models but designed for CT70 1969-1970; Will also fit Z50A 1969-1970.
|
Throttle Cable Hinge for a stock Honda throttle setup. Will fit: CT70 1970-1973; Z50A 1969-1978; P50 1968,1970; and a QA50 1971, 1973-1975. It is #17 in the diagram.
|