MSRP: $28.95
Price: $19.99
You Save: $8.96 (31 %)
We designed these replacement handlebar knobs to work with the stock Ct70/Z50 handlebar clamps. Even if you are using our tall bars but your stock clamp- these will work. Depending on your style top plate- you may or may not need a washer (not included).
|
Rear brake cable designed to work w/ our universal perch (PU43-1101L) & Trailbuddy's tall bars, and the stock rear brake parts on a CT70. Overall length is 51 3/4 inches with a throw of 4 1/2 inches.
See pictures for routing and fitment questions.
|
Rear brake cable designed to work with Trailbuddy's taller bars and left controller with lever and the stock rear brake set up on a CT70. Overall length is 50 1/2 inches with a 3 1/4 inch throw.
|
Replacement Left Hand Grip. Firmer rubber to slide over the handlebar. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.
|
Replacement Right Hand Grip. Soft and flexible rubber to slide over the metal throttle pipe. Direct replacement for the CT70 1969-1972 (HK0, K0, and HK1) models. Z50 1970 and 1971 (K1 and K2) models. It will fit any 7/8th handlebar.#20 in the diagram.
|
MSRP: $129.00
Price: $122.09
You Save: $6.91 (5 %)
BMX style handlebar kit. Your choice of either a chrome or black matte finish. Kit includes handlebars, top plate and risers.
|
Will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978; and QA50 1973-1974 (K1-K3) Left Grip. It is #19 in diagram.
|
Grip will fit any 7/8th handlebar but is designed for the CT70 1972-1974 (K1-K3); Z50A 1972-1978 (K3-K6); and QA50 1973-1974 (K1-K3). It is # 18 in diagram.
|
Will fit most 7/8 bars but was designed for a CT70 1975 (K4)- 1978 and XL70 1974-1976 left grip. It is #9 in diagram.
|
Will fit most 7/8 bars but was designed for a CT70 1975 (K4)- 1978 and XL70 1974-1976 right grip. It is #8 in diagram.
|
MSRP: $37.95
Price: $30.75
You Save: $7.20 (19 %)
Replacement handle bar clamp for most replica bikes. It will only work with our aftermarket bars. It will NOT WORK w/ a stock top plate. See full web for more.
|
Left Handle Bar Controller with Grip-Black it comes with a removable choke cable mount. It does not have an "off" option for the headlight. We were sent this style in place of our TB026LH. We have no color match for the right side.
|
MSRP: $16.95
Price: $15.25
You Save: $1.70 (10 %)
Waffle pattern in finger area for traction, smooth on palm side to reduce blisters
For 7/8" bars; 4-1/2" L
Sold in pairs
Available in Soft, Medium or Firm compound *please note the color variations as you go to a firmer compound*
|
MSRP: $16.95
Price: $15.25
You Save: $1.70 (10 %)
Firm compound; same as stock
Medium compound for better traction and comfort
Soft compound ideal for maximum traction
For use with twist throttles
Sold in pairs
Will fit 7/8th bar
Will fit 4.5" Long Twist Throttle
|
MSRP: $16.95
Price: $15.25
You Save: $1.70 (10 %)
Designed after the CR Honda grip
Available in soft, medium and firm compounds
For use with twist throttles
For 7/8" bars; 4-1/2" L
Sold in pairs
|
Eliminates grips slipping and sliding in the heat of the action
A must when using medium- or soft-compound Renthal grips
Available in 25mL tubes
|
Replacement Hydraulic Brake Lever will replace your damaged hydraulic brake lever on our 30mm and 45mm/inverted fork assemblies. It will also work on the Icebear Champion fork system.
|
MSRP: $65.99
Price: $62.43
You Save: $3.56 (5 %)
Our tall bar set are 2” wider and 2” taller than the standard replica handlebars out on the market. Sold as a pair. These are not like stock CT70, please see full description for differences.
|