|
|
Kickstart Spindl/Tranmission- 17mm Circlip
|
8 in stock
Item Number: OEM90601-001-000
OEM 17mm Circlip-used in two different areas on the CT70 Engine.
1) Kickstart Spindle 17mm Circlip #15 in schematic
2) Transmission 17mm Circlip #14 in schematic
Will Fit: CT70 and Z50A; and many other models.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $8.95
Price: $6.53
You Save: $2.42 (27 %)
Genuine JT 420 Front Sprocket for CT70, ATC70, and other compatible models. Has various tooth sizes for your gearing needs. Measure your sprocket to confirm fit if not using a stock motor or Trail Buddy engine. Will mount on a 17mm output shaft.
|
Genuine Honda crankcase kick starter oil seal (#13 in diagram). Fits CT70, Z50, and other Honda mini bike engines. See full description for details.
|
Replacement Rubber for the Kickstart lever.
Will fit:
CT70
Z50a
and many other models.
It is #10 in the diagram.
|
Genuine Honda Transmission Oil Seal (17x29x5)**
Shown as #15 in the diagram. Helps prevent oil leakage from the transmission output shaft.
|
Honda Front Sprocket Drive Plate with Bolt Kit (1 qty 23802-040-000 & 2 qty 92101-06008-0A). Replaces worn or missing parts to secure the front sprocket. Designed for 420 front sprockets. Sprocket shaft mount: 17mm, mounting holes: 32mm center-to-center.
|
Precision crank bearings
Kits contain right and left crankshaft bearings; 2-stroke kits contain outer seals
Seals designed with a fluorocarbon lip to reduce dry start friction on 2-stroke engines
4-stroke crank bearings do not include seals
|
Aftermarket replacement kick starter shaft
Will fit:
CT70 1969-1978
Z50A 1968-1978
|
MSRP: $25.99
Price: $17.59
You Save: $8.40 (32 %)
Aftermarket kick start lever made for the stock 70cc motor or the aftermarket 125cc motor. This fits on a 13.5mm spline and is 9 inches long. Meant to replicate the stock lever but at a third of the price! Will NOT fit on the Icebear with the stock pipe.
|
OEM 17mm Circlip-used in two different areas on the CT70 Engine.
1) Kickstart Spindle 17mm Circlip #15 in schematic
2) Transmission 17mm Circlip #14 in schematic
|
Essential for anyone rebuilding their engine or needing to replace the kickstart spindle.
This spring fits all year CT70s and Z50As.
Refer to the schematic for its placement (#5).
Don’t overlook this crucial component.)
|
Product Reviews
|
|