JIS Cross-Head Hex-Drive Bits

<< Previous in Tools and Manuals

Next in Tools and Manuals >>

Price: $4.50

1 in stock

Item Number: PU3850-0288

Manufacturer: Motion Pro

Typing Paragraphs in HTML

⚠ California Prop 65 ⚠

Quantity:

Add to a new shopping list

Email this page to a friend

Features

Designed to fit JIS cross-head screws used on Honda motors
JIS bits are a must-have for most Japanese-made products and work equally well on traditional Philips-head screws
Use of traditional Philips driver on JIS cross-head screws will damage screw head

STYLE	#3 / CROSS-HEAD
APPLICATION	JAPANESE BIKES
COLOR/FINISH	BLACK
MATERIAL	STEEL
MEASUREMENT SYSTEM	SAE
DRIVE SIZE	1/4"
UNITS	PAIR

Typing Paragraphs in HTML ⚠ California Prop 65 ⚠ WARNING: This product contains chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.P65Warnings.ca.gov.

Related Products

Belray Foam Filter Oil Price: $15.95 Quantity: This is a 1 liter bottle of BEL RAY foam filter oil. We use this stuff on our bikes with foam filters and this oil works great.	Premium 4-Cycle Oil Price: $9.99 Premium 4-Cycle Oil
Moose Racing CT70 /Z50 Steering Stem Bearing Kits MSRP: $48.95 Price: $47.95 You Save: $1.00 (2 %) Quantity: Moose Racing steering stem bearings kit is designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings, or a high quality replacement if your bike comes with taper bearings stock.	Stainless Steel Bolts for Rims Kit Price: $19.05 Quantity: All bolts, washers and nuts for rims. Stainless steel. 1 set for 1 rim. The heavy hex nut (rim to hub) is slightly smaller than the stock.We cannot find a source for a stainless steel in that exact size. Please see full description for instructions.
Piston Pin Clip Price: $0.50 Quantity: Honda Piston Pin Clip	CT70/Z50 Ignition Points MSRP: $11.95 Price: $10.75 You Save: $1.20 (10 %) Ignition Points Exact fitment listed in full description.
Turned Out Intake Manifold for Aftermarket Motors MSRP: $29.50 Price: $22.50 You Save: $7.00 (24 %) Quantity: Turned Out Intake Manifold for Aftermarket Motors comes with an insulator, gasket and bolts to attach to your aftermarket carb. The intake measures 47.5 mm center to center on the carb side. Not designed to work with a stock CT70 motor/Carb.	M6 x 1.0 Hand Tap Price: $8.25 M6 Hand Tap M6 x 1.0 4 flute plug tap, made from high speed steel. This is a great tool for cleaning out rusted or panted in taped holes.
M8 x 1.25 Hand Tap Price: $10.50 M8 x 1.25 4 flute plug tap, made from high speed steel. This is a great tool for cleaning out rusted or panted in taped holes.	Replacement Luggage Rack Bolts Stock CT70 Frame Kit Price: $5.50 Quantity: Replacement bolts for luggage rack CT70. These come with the original purchase of the Luggage Rack (TB024) however if you have lost the mounting bolts, these are the ones that are needed for M6 applications.
Replacement Luggage Rack Bolts for Replicas Kit Price: $7.42 Quantity: Replacement bolts for luggage rack for replicas. These come with the original purchase of the Luggage Rack (TB024) however if you have lost the mounting bolts, these are the ones that are needed for M8 applications.	Shock Outer Washers Kit MSRP: $10.50 Price: $7.50 You Save: $3.00 (29 %) Quantity: Extra large outer washer to retain your shocks, this washer is a 1/8in thick and 1 ¼ OD. This would need to be installed both on the top and the bottom shock mounts. Correlates with #15 in the Honda Diagram. Qty. 2
Large Shock Inner Washers Kit Price: $3.00 Quantity: 1/2" x 1.062" OD Low Carbon Zinc Finish Steel large inner washer to retain your shocks, this washer is great for the rubber bushing. This is just needed on the top shock mounts. It correlates with #16 in the Honda Diagram. Qty. 2	M6 Bolt 20mm Long Price: $0.80 Quantity: M6 Bolt 20mm Long
M6 Flat Washer Price: $0.20 Quantity: 6 MM Flat Washer	8mm Flat washer Price: $0.20 Quantity: 8mm Flat washer
M6 Lock Washer Price: $0.20 Quantity: M6 Lock Washer	M8 Lock Washer Price: $0.20 Quantity: M8 Lock Washer
M8 x 1.25 Hex Nut Price: $0.40 Quantity: M8 x 1.25 Nut	Engine Bolt Top Kit Price: $5.22 Quantity: This bolt is meant to replace the top engine bolt in either a clone motor or stock 70cc motor- as long as you are using an AFTERMARKET air filter and not the black canister filter. This bolt measures M8x1.25, 130mm long.