|
|
Large Shock Inner Washers Kit
|
unlimited in stock
Item Number: TB120A
Manufacturer: Trail Buddy Inc.
1/2" x 1.062" OD Low Carbon Zinc Finish Steel large inner washer to retain your shocks, this washer is great for the rubber bushing. This is just needed on the top shock mounts. It correlates with #16 in the Honda Diagram. These are needed to avoid the below issues.
Qty. 2
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
M10 ACORN / CAP NUT/Shock Nut
These are used for mounting the shocks. Sold each (1) Recommend 4 per bike.
|
MSRP: $79.99
Price: $66.99
You Save: $13.00 (16 %)
Good Quality Chrome adjustable shocks.13 inches eye to eye mounting from center to center.
You will not be able to use your stock shock covers over these. Also will not work for 1990-94 models with stock chainguard.
The price is for a set of shocks
|
Shocks are 13in/330mm eye/eye length, CNC machined lower shock mounts & have a better rebound than older versions. Comes w/ correct bushings for top mount.
|
MSRP: $125.00
Price: $87.99
You Save: $37.01 (30 %)
CT70 Black and Silver Level 3 Shock-The shocks have an eye to eye length of 13in / 330mm, bigger remote reservoir, CNC machined lower shock mounts and have a better rebound than the older versions. Comes with correct bushings for top mount. Price per Pair
|
Upper 12mm ID shock bushings for Aftermarket shocks. This is a set of two.
|
MSRP: $10.50
Price: $7.50
You Save: $3.00 (29 %)
Extra large outer washer to retain your shocks, this washer is a 1/8in thick and 1 ¼ OD. This would need to be installed both on the top and the bottom shock mounts. Correlates with #15 in the Honda Diagram.
Qty. 2
|
|
|