|
|
12v 4-Pin Key Switch with Lock Assembly
MSRP: $42.00
Price: $36.00
You Save: $6.00 (14 %)
14 in stock
Item Number: TB153
Manufacturer: Trail Buddy Inc.
- This replacement lock assembly will mount into
the stock CT70 frames (1969-1979, 1992-1994), our Skymaxx clone bikes and most other clone
frames*.
- Will fit 1980s CT70 frames by enlarging the frame hole slightly,
- The 4-pin wire connections are
a direct plug into the following harnesses we offer: TB160, TB515, TB531, and
TB422.
- 2 position (on/off)
- If you have any other wire
harness than what is listed above, we do not guarantee any wire connections and any modifications will be your responsibility
- **Any other brand of clone bike may require additional modifications.
- Installation note: if you have a newly painted frame, please remember to remove paint from the key mount hole for a good ground connection.
Our aftermarket parts are
made for the clone Skymaxx reproduction bike and are very good quality but are
not made to Exact Honda Specifications and exact fitment. We have
installed them on our showroom stock CT70 bikes prior to selling the item to
make sure that they will fit with the least amount of modification as possible.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Price: From $75.00 to $107.10
We designed this harness to work with all our electrical components to make it a truly trouble free harness with plug and play. This is a generic 12v harness and may come with additional connections that you may or may not use. See full web for more.
|
MSRP: $79.99
Price: $64.99
You Save: $15.00 (19 %)
ELECTRIC START can be added using TB609 kit. This harness converts the CT70 to use our Lifan 125cc engines while utilizing your stock 1969-1973 Honda electrical components EXCEPT for the ignition switch. This will not have any wires for turn signals.
|
MSRP: $75.99
Price: $64.99
You Save: $11.00 (14 %)
ELECTRIC START can be added using TB609 kit. This harness converts the CT70 to use our YX 140cc engines while utilizing your stock 1969-1973 Honda electrical components EXCEPT for the ignition switch. This will not have any wires for turn signals.
|
This wiring harness is perfect for your custom build using generic handlebar controls w/ no multi pinned plastic style connectors only bullet style. It is a complete main wiring harness and installs easily for a clean, custom look. See full web for more.
|
MSRP: $10.99
Price: $5.99
You Save: $5.00 (45 %)
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
| |
|
|