MSRP: $72.50
Price: $68.20
You Save: $4.30 (6 %)
New brake drum kit with shoes for the classic trail 70 and reproduction bikes. Our aftermarket parts are made for clone reproductions of the Trail 70 (DAX) and are very quality but are not made to Exact Honda Specification
|
Mooseracing premium, high quality bearings, EMQ standard seals. Kits include all bearings and seals required to do a wheel bearing rebuild, may or may not use all for application.
-This Part Will Fit-
CT70 Trail 69-94; CT110 Trail 80-86; and more
|
Sprocket Retention Mating Kit
Installation reminder: lift whatever tab of the mating kit that is over the sprocket opening. Take a flat head and lift up.
|
MSRP: $13.68
Price: $13.31
You Save: $0.37 (3 %)
Upgrade your bike with our Rear Axle Bushing Kit, featuring both right and left side bushings for near-exact Honda fitment at a great price. The thicker bushing goes on the rear brake side; the thinner one on the wheel side. Perfect for smooth rides!
|
Meant to keep your rear sprocket on the hub, it's highly recommended to replace your old snap ring if it hasn't been done already.
|
Price: From $17.33 to $21.95
Stock Replacement Style Rear Sprocket for with a chain size of 420.
-This Part Will Fit-
All CT70s
All Replicas with this style rear hub
ATC70
TRX70
|
Upgrade your CT70 with our durable 420 rear sprockets for bolt-on hubs! Available in four sizes, made of high-quality steel. Fits Icebear Champion (10mm holes) and aftermarket hubs, but not stock. Includes mounting hardware. Don't forget to replace your c
|
Rear Brake Lever for Clone Cam-THIS WILL NOT FIT A STOCK SETUP.
Replacement piece for https://mytrailbuddystore.com/rearbrakedrumwithshoes.aspx
|
|
MSRP: $85.00
Price: $84.70
You Save: $0.30 (0 %)
Upgrade your classic Honda CT70 or reproduction/Dax CT70 with our dark silver aluminum replacement hub and pre-installed bearings. This bolt-on sprocket system is ideal for higher cc engines and requires stock-style rims. Explore our rear sprocket options
|
LEFT WHEEL SIDE COLLAR for a CT70 1970-1994. It is #6 in the diagram.
|
Heavy hex nuts are slightly larger and thicker than the standard hex nut, these are for the cast hub to rim bolts.
M8 x 1.25 Nut
Qty. 4
|
Collar RR Brake Panel Side for a CT70 1970-1994. It is #7 in the diagram.
|
Aftermarket replacement cam for rear brake CLONE setup. It will not work on a stock setup. It is a replacement part for https://mytrailbuddystore.com/rearbrakedrumwithshoes.aspx
|
Rear Sprocket Wheel Dampener Rubber Set of 4. These will only be used with a STOCK style sprocket with the four prongs on one side. Will Fit CT70 1970-1994 and the ATC70 1973-1974 and 1978-1985. Number #5 in diagram.
|
Genuine Honda rear rod brake spring (#4 in diagram). Fits CT70 (1970–1994), CT90 (1966, 1969–1972, 1974–1979), Z50A (1971–1978), and Z50R (1979–1987). See full description for fitment details.
|
Genuine Honda rear sprocket/wheel dampener plate. For stock sprockets on CT70 (1970–1994), ATC70 (1973–1985), and TRX70 (1986–1987). See diagram #6.
|
Trail Buddy has teamed up with Rebel Gears to create an aluminum rear sprocket made for our bolt-on rear hubs! This only fits on our hubs or on an Icebear Champion. Comes in both a 30 tooth and a 32 tooth size.
|