MSRP: $125.00
Price: $89.99
You Save: $35.01 (28 %)
Chrome and Silver Level 3 Shock the shocks have an eye to eye length of 13in / 330mm, bigger remote reservoir, CNC machined lower shock mounts and have a better rebound than the older versions. Comes with correct bushings for top mount.
|
Designed & Manufactured by Trailbuddy Inc.the front high mount fender bracket is designed to mount on the bottom side of the triple tree (steering stem) to mount our TB229- High Mount Fender to the 30mm Fork Assemblies (TB149 or TB167) or your stock fork
|
MSRP: $79.99
Price: $64.99
You Save: $15.00 (19 %)
Good Quality Chrome adjustable shocks.13 inches eye to eye mounting from center to center.
You will not be able to use your stock shock covers over these. Also will not work for 1990-94 models with stock chainguard.
The price is for a set of shocks
|
Upper 12mm ID shock bushings for Aftermarket shocks. This is a set of two.
|
Fork Seal 26 x 37 x 10.5 for 26mm Chinese Forks
|
Replaces the front fork speedometer gear only, WILL NOT WORK ON THE ORIGINAL OEM FORKS. Fits a 10mm axle.
|
MSRP: $125.00
Price: $115.00
You Save: $10.00 (8 %)
Headlight bracket ears designed to fit our 30mm front fork hydraulic brake kit to mimic the stock style of CT70 1972+ headlight brackets. They will slide over the fork tubes and will mount in between the top plate and the top of the triple tree.
The
|
Front Fender Mounting Bolt Kit
This kit will include 2 M6x16 Bolt, 3 M6 flat washers and 1 M6x8 screw.
These are number #15,16, and #20 in the schematic.
|
MSRP: $70.00
Price: $55.50
You Save: $14.50 (21 %)
BILLET ALUMINUM CNC MACHINED TOP PLATE
Will Fit:
1972+ CT70's
**the mounting holes are not narrow enough for the first few years forks**
|
Replacement rear fender for the reproduction bikes
-This Part Will Fit-
All Replicas
|
MSRP: $65.00
Price: $53.50
You Save: $11.50 (18 %)
Replacement Chrome Rear Fender. Will bolt on to all CT70 and replica frames. Does not have the rolled hem around the perimeter edge on the underside portion of the fender like the stock OEM fender had.
|
MSRP: $10.50
Price: $7.50
You Save: $3.00 (29 %)
Extra large outer washer to retain your shocks, this washer is a 1/8in thick and 1 ¼ OD. This would need to be installed both on the top and the bottom shock mounts. Correlates with #15 in the Honda Diagram.
Qty. 2
|
1/2" x 1.062" OD Low Carbon Zinc Finish Steel large inner washer to retain your shocks, this washer is great for the rubber bushing. This is just needed on the top shock mounts. It correlates with #16 in the Honda Diagram.
Qty. 2
|
MSRP: $125.00
Price: $89.99
You Save: $35.01 (28 %)
CT70 Black and Silver Level 3 Shock-The shocks have an eye to eye length of 13in / 330mm, bigger remote reservoir, CNC machined lower shock mounts and have a better rebound than the older versions. Comes with correct bushings for top mount. Price per Pair
|
MSRP: $23.50
Price: $17.50
You Save: $6.00 (26 %)
TrailBuddy steering stem bearings kit is designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings.Tapered roller bearings provide decreased maintenance along with less wear, smoother operation and longer life.
|
REPLACEMENT DUST SEALS FOR 30MM FORKS
|
31mm Rubber Front Shock Covers
These are designed for the aftermarket fork units (TB149/TB167).
These will NOT work on any stock Honda Forks.
|
Shocks are 13in/330mm eye/eye length,CNC machined lower shock mounts & have a better rebound than older versions. Comes w/ correct bushings for top mount. Stiffness is increased by tightening the spring preload,air will only effect rebound set by factory
|
This is designed for the CT70 Fork years 1972-1978. Will Not fit on the early models (1969-1971) -which have the narrow forks. This is a great option to purchase if you are switching your stock fold down bars to any BMX style bars.
|
Replacement top plate for replicas.It can be a replacement for a stock Honda CT70 1972+ but you will have to get the clone handlebar clamp (TB044)& knobs (TB026HB). It will not fit a 1969-1971 CT70 unless you have 1972+ style forks or aftermarket forks.
|
MSRP: $300.00
Price: $235.99
You Save: $64.01 (21 %)
This is a full front-end assembly.
The assembly will include the forks, axle, hub, disc brake, caliper, pads, brake lever assembly, 30mm triple tree, and speedometer gear and speedometer cable. There is more information on these in the full web version
|
Price: From $365.39 to $365.84
Billet CNC Disc Brake Kit 30mm-This is a full front-end kit. Please see full web version for more information and fitment recommendations.
| | |