|
|
MSRP: $14.85
Price: $5.50
You Save: $9.35 (63 %)
Dual Stage Foam Air Filter all black. These are not pre-oiled so you will need to do that prior to using. Both size filters are 4" wide and 4" overall height. The foam height is 3". Available in either a 45mm or 48mm diameter.
|
MSRP: $26.02
Price: $15.50
You Save: $10.52 (40 %)
This is a brand new kick starter for all trail 70 remakes and classic bikes. Our aftermarket parts are made for clone reproductions of the Trail 70 (DAX) and are very good quality but are not made to Exact Honda Specifications. Fits a spline size of 12mm.
|
ALUMINUM GEAR SHIFT FOR CT70, HONDAZ50
|
MSRP: $16.50
Price: $3.50
You Save: $13.00 (79 %)
The Electric Solenoid is vital for our 12V conversion kits and standard with our electric start motors. If your electric start engine didn’t include one, this solenoid works for all two-wire 12V applications, ensuring reliable starting power.
|
12v Full-Wave Rectifier Assembly with 4 pin connector. All Trailbuddy engines are Full-Wave output for the best performance. If you purchased an engine elsewhere- you will want to check with the supplier as to what wave output is. It is important.
|
MSRP: $23.99
Price: $21.95
You Save: $2.04 (9 %)
Aftermarket CNC Gear Shift Lever is a great alternative to the stock gear shift or some of the smaller gear shifters that come with aftermarket motors. This will NOT fit onto the Zongshen 190cc motor. Measures: ____________
|
Replacement gaskets, insulators and bolts for aftermarket motors. Not the 190cc's. It's highly recommended that you check the dimensions of your intake manifold and compare them to the measurements listed in the larger description.
|
MSRP: $26.50
Price: $18.00
You Save: $8.50 (32 %)
This IS A SCRATCH AND DENT PART, PLEASE CHECK DESCRIPTION AND PICTURES. Please check the dimensions of your spline before purchase, this is meant to fit on a spline with an outer dimension of 12mm.
|
MSRP: $25.99
Price: $17.59
You Save: $8.40 (32 %)
Aftermarket kick start lever made for the stock 70cc motor or the aftermarket 125cc motor. This fits on a 13.5mm spline and is 9 inches long. Meant to replicate the stock lever but at a third of the price! Will NOT fit on the Icebear with the stock pipe.
|
25mm Molkt carb. Great for 140cc YX engines. If you purchased one of our 140cc YX engines in the past, this is the replacement carb. Requires a 45mm air filter.
|
MSRP: $33.50
Price: $19.99
You Save: $13.51 (40 %)
Upgrade your ride with this brand new kick starter for all Trail 70 remakes and classic bikes. Fits splines with an outer dimension of 12mm. Compatibility: All CT70s. Ensure a reliable start—grab yours today!
|
MSRP: $15.99
Price: $6.50
You Save: $9.49 (59 %)
Replacement cap for the clutch adjuster on the left side of your aftermarket engine. Will fit our 125cc, 140cc, and 190cc engines. Comes with gasket.
|
MSRP: $27.78
Price: $15.99
You Save: $11.79 (42 %)
5 pin CDI (capacitor discharge ignition) fits many 4-stroke models of ATVs, dirt bikes, go karts, scooters, & mopeds. Many engines require this CDI, including 50cc to 140cc. Verify the number of pins and style of plug of your CDI before you place order.
|
MSRP: $22.59
Price: $13.50
You Save: $9.09 (40 %)
Aftermarket gear shift lever, will not fit a stock Honda shifting shaft. Click on picture to see more.
|