Genuine Honda OEM Throttle Cable Grommet.
Mounts on the inside of the handlebars and is shown as #2 in the diagram. Most models use 2–3 grommets.
|
Replacement Rubber for the Kickstart lever.
Will fit:
CT70
Z50a
and many other models.
It is #10 in the diagram.
|
|
Genuine Honda replacement battery band (#15 in diagram). Fits CT70 (1970), CT70H (1971), and Z50A K1 (1970). See full description for measurements.
|
OEM Replacement Gear Shift Rubber
|
MSRP: $9.50
Price: $7.87
You Save: $1.63 (17 %)
Clone CT70 Fuel Tank Rubbers these are meant to mount onto the clone frames but can be modified by the customer to work on your build. Sold as a set.
|
MSRP: $28.99
Price: $20.89
You Save: $8.10 (28 %)
Replacement rubber gasket kit for plastic fuel tanks, including a large neck filler gasket, two small frame tank pads, and a fuel bracket cover gas cap O-ring. Compatible with stock or reproduction CT70 plastic fuel tanks.
|
MSRP: $9.50
Price: $7.33
You Save: $2.17 (23 %)
Replacement Battery Band for Hondas and the Replicas. The new design is a little bit longer and has a rubber loop on the top to help cushion the battery. The band measures at 4.5 inches end to end.
|
Rubber gas tank neck grommet for steel gas tanks. This will not fit on a stock CT70 plastic nor stock CT70 metal tank.
-This Part Will Fit-
All Replicas
CT70 with the Clone steel tank
|
Rear Fender Rubber Mounting Grommet for the taillight bracket and fender area. It will fit a CT70 1970-1971; and a Z50A 1972-1978. It is #10 in the diagram.
|
MSRP: $25.99
Price: $22.72
You Save: $3.27 (13 %)
This is a rubber set for the steel replacement gas tank for the classic trail 70 and reproduction bikes.
1-Larg Rubber Ring for Gas Tank to Frame
2-Small Pads/Fame Pads
1-Small Rubber Ring
Does not include a gas cap.
|
MSRP: $12.99
Price: $7.49
You Save: $5.50 (42 %)
WIRE HARNESS RUBBER/GROMMET CLONE- this works great if you are converting to a 12v harness. The slot to thread the harness through is larger than the stock OEM one to accommodate a bigger harness.
|
Rubber Ring for Seat to Frame
|
Grommet and Bolt Kit for mounting Trailbuddy Taillight Bracket Kit to a 1969-1971 Frame year with OEM Honda Grommets and Collars. Please see schematic for all included parts.
|
Rear Bottom Replacement Shock Absorber Bush. Will fit CT70 1970-1979, Z50A 1972-1978, Z50R 1979-1999. # 12 in the diagram.
|
MSRP: $48.99
Price: $39.99
You Save: $9.00 (18 %)
Rear Sprocket Wheel Dampener Rubber Set of 4. These will only be used with a STOCK style sprocket with the four prongs on one side. Will Fit CT70 1970-1994 and the ATC70 1973-1974 and 1978-1985. Number #5 in diagram.
|
Replacement Rubber Gasket that installs between the taillight bracket and taillight lens. #7 in the diagram. Sold individually. Will fit: CT70 1972-1982; CT90 1969-1972; 1974-79; ST90 1973-1975. Taillight Bolts: OEM92101-050200A.
|
Frame Grommet that mounts in the rear of the frame. You will feed the taillight wires through this. It is #3 in the diagram. Will fit CT70 1970-1979; Z50A 1970-71 (K1-K2), and CT90 1966.
|
Replacement Rubber Reflector Base. Sold individually.
Will Fit: CT70 1972-94
It is #1 in Honda schematic.
|
OEM Replacement Rubber Side Stand Kit for the CT70's 1975-1980
The kit includes #9,10,23, and 20 in the diagram.
|
MSRP: $10.99
Price: $5.85
You Save: $5.14 (47 %)
This durable Clone Battery Band is designed for 6V batteries, measuring 3.5" x 1.25". Made of rubber with just the right amount of stretch, it secures your battery perfectly. Not suitable for most 12V applications due to limited stretch.
|