All items in this section are non-returnable and is sold as is.
Price: From $36.30 to $72.59
Replacement Triple Tree for either our 30mm Fork Assemblies (TB149 or TB167) or the clone 26mm Fork Assemblies. It will slide over the stock 26mm forks but you will not be able to use the rubber boots and the stock fork ears will not fit.
|
MSRP: $69.95
Price: $48.40
You Save: $21.55 (31 %)
Scratch and Dent K0 (1969-1971) Replica Taillight Bracket, non-returnable and non-refundable. Please see further pictures for examples. These are meant to take the place of the original bracket without loosing looks or functionality.
|
SCRATCH AND DENT There are quality issues with the paint from the manufacturer that does not meet our standards. SOLD AS IS. NO RETURNS NO REFUNDS NO WARRANTY. Mounting hardware included.
|
Replaces the front fork speedometer gear only, WILL NOT WORK ON THE ORIGINAL OEM FORKS. Fits a 10mm axle.
|
MSRP: $55.00
Price: $48.40
You Save: $6.60 (12 %)
Will not fit on Trailbuddys forks or stock, uses a 10mm axel instead of a 12mm. NON-RETURNABLE AND NON-REFUNDABLE
|
MSRP: $55.99
Price: $42.35
You Save: $13.64 (24 %)
CT70 carb with a round bowl with all components on the left side not the exhaust side. It will fit 1969-1976 intake but it won't fit with the stock airbox. You will need an aftermarket clamp on style filter with a 39mm diameter.
|
CT70 style Front Brake Cable with no internal switch with Grey Sheathing. Will NOT work with stock 1969-1974 levers. Overall length of 45 inches. The barrel is 8mm.
This is a Non Returnable/No warranty/Sold As Is part
|
Cost effective left controller option, originally coming from a Skyteam T-Rex Z50 Clone. This part is being discontinued so it is non-returnable, non-refundable and has no warranty.
|
Cost effective right controller option, originally coming from a Skyteam T-Rex Z50 Clone. This part is being discontinued so it is non-returnable, non-refundable and has no warranty.
|
MSRP: $26.50
Price: $21.78
You Save: $4.72 (18 %)
This IS A SCRATCH AND DENT PART, PLEASE CHECK DESCRIPTION AND PICTURES. Please check the dimensions of your spline before purchase, this is meant to fit on a spline with an outer dimension of 12mm.
|
Will not fit without modification, see description for details.
|
LED tail light and plate holder.
|
Left Handle Bar Controller with Grip-Black it comes with a removable choke cable mount. It does not have an "off" option for the headlight. We were sent this style in place of our TB026LH. We have no color match for the right side.
|
Replacement Parts for the Footpeg Bracket Assembly
Center Stand
Non returnable/No Warranty/NO Refund
|
MSRP: $65.00
Price: $59.90
You Save: $5.10 (8 %)
Small blemishes from the factory. New front fender meant for Honda CT70's, direct bolt on to any original triple tree or our aftermarket forks. Has correct mounting holes for the cable guide. WILL NOT FIT AN ICEBEAR CHAMPION. SOLD AS IS. NO RETURNS
|
Clone Speedometer Cable with square pegs on both ends. Will NOT work for stock hubs. It measures 26.5 inches overall and the sheath length is 25 7/8 inches.
Liquidating stock. This is a non returnable/non refundable item.
|
Taillight assembly new and old bikes, this kit will come with the 12v tail light, 4 K&S blinkers and the chrome tail light bracket. The cat eye blinkers are a tight fit in the bracket mounting hole. hey would fit better if the hole were drilled out.
|
Aftermarket twist throttle with electric start button. Also includes a grip.
|
MSRP: $34.12
Price: $25.99
You Save: $8.13 (24 %)
Rebuilding your ATC70 motor? This is the perfect engine gasket set for your rebuild. Will work with Honda ATC70 1978-1985 models. Please see the full website for the list of gaskets that are included. NON Returnable/no warranty/no refund
|
MSRP: $35.19
Price: $29.99
You Save: $5.20 (15 %)
SCRATCH AND DENT, SOLD AS IS, NO WARRANTY OR RETURNS.
Small issues with chroming, see picture for details.
|
MSRP: $39.00
Price: $24.20
You Save: $14.80 (38 %)
SCRATCH AND DENT Z50A K1/1970 Headlight Bucket Emblem
Small scratches on face, see picture for more.
|
Engine Gasket set for our Zongshen 125cc Motors.
Includes all pictured- has 4 valve seals (not all 4 are pictured)
| | |