12mm Drain Plug Washer it is #18 in the diagram.
Will work on any engine that needs a 12mm washer in the drain plug area.
|
Honda CT70 Exhaust Shield Oval Screw these are the replacement screws from Honda for your heat shield on the stock muffler. Please see #20 in diagrams. Will fit: CT70 1970-82; CT90 1970-72,74-79; CT110 1980-86; and CL70 1969-72.
|
Brake Adjusting Nut- Front and Rear Applications. Will fit CT70 1970-1976, Z50A 1969-1976, Z50R 1980-1999 and CT90 1966, 1969-1976. Front Application: #19 in diagram (pictured first). Rear Application: #6 in diagram. (pictured second)
|
Front Brake Setting Nut will fit CT70 1970-1976; CT90 1966, 1969-1974; Z50A 1969-1978 and Z50R 1979. It is #16 in diagram.
|
Head Stud 188mm long, threaded on both ends. #17 in diagram. Sold individually. Fits: CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1999; ATC70 1973-74, 1979-1985; TRX70 1986-1987; XR50 2000-2003.
|
Replacement 5x20 Hex Bolt. This fits many bikes and many applications. It will work on the CT70's taillight brackets, Z50A Ignition coils and much more.
|
1/4" x 0.734" OD Low Carbon Zinc Finish Steel USS General Purpose Flat Washer. This is the washer that we use in the Luggage Rack Kit. TB024.
|
Metric Flat Head Phillips Machine Screw Zinc-Plated STL, M5 Size, 10mm Length, .8mm Pitch
This is the bolt that holds the clutch basket plate in place and is #26 in the diagram
|
Exhaust stay bolt for the CT70's. This bolt is used to hold the exhaust onto the shock mount. Will fit CT70 from 1970-1976. #13 in the diagram.
|
Chain guard to chain case Bolt. #19 in diagram. If you need all the bolts for the Left Crankcase/Alternator Case please see TB390.
|
Zinc Plated M6-1.0 Hex Nut sold individually
|
This bolt is meant to replace the top engine bolt in either a clone motor or stock 70cc motor- as long as you are using an AFTERMARKET air filter and not the black canister filter. This bolt measures M8x1.25, 130mm long.
|
M8 x 1.25, 120mm long Engine Bolt Bottom
Qty. 1
|
M10 ACORN / CAP NUT
These are used for mounting the shocks. Sold each (1)
|
|
Replacement Headlight Beam Adjustment Screw. Will fit: CT70 1970-1982; Z50A K1/K2 (1970-1971); CT90 1966,1969; XL70 1974-1976; CL70 1969-1972; and CL90 1967. It is #3 in the diagram.
|
Middle Bushing
This measures 3 3/4 inches long.
|
Air Filter Bolt- the long one that holds all the components together. Will fit Ct70 1970-1994, ATC70 models- see full description for ATC Fitments. It is #19 in the diagram.
|
Acorn Nut Bolt for Air Filter Bolt/Cylinder Head Cover
Will fit:
CT70 1970-1994
CT90 1966
Z50A 1969-1978
Z50R 1979-1988
ATC70 1973-1974, 1978-1985
|
This is a replacement screw for either the air filter hose or the screw that holds the alternator to hold the lighting coils on. It is # 6/18 in diagram.
| |