|
|
Stator Wire Harness Replacement Grommet
|
3 in stock
Item Number: OEM32971-035-000
·
Genuine Honda OEM stator wire harness
replacement grommet
·
Identified as #12 in the Honda parts diagram
·
Fits the following models:
·
CT70
(1970–1982)
·
Z50A
(1970–1979)
·
Seals and protects the stator wire
harness where it passes through the engine case
·
Prevents moisture and debris from
entering the engine
·
Highly
recommended when rebuilding or replacing your stator with our available
kits TB307A (CT70 (1970-1978)/Z50AK1); TB307B (Z50A K2-78); and TB369 (CT70HK0 and HK1 with a HITACHI MAGNETO)
·
Maintains proper wire routing and OEM
fit
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Crankcase Seal by Stator Plate (OIL SEAL (18.9X30X5) ) *If you purchase a stator rebuild kit (TB307A/B or TB369) this oil seal is included in that kit.
Will fit all CT70's and Z50's- and many other models.
It is number 13 in the diagram:
|
Replacement Stator O-Ring from Honda. This O-ring is in some of the stator rebuild kits that we have, but if you are not replacing the coils, and just need the seal, here you go. Fits many Honda models, specifically the CT70 & Z50. #16 in the diagram.
|
Reproduction Stator Assembly Kit for the CT70KO thru 1979 models (Not for H model) and the Z50K1 Models- It is virtually identical to the original and comes complete with everything you need to get your stator back in working order except for the plate.
|
Virtually identical to the original & comes complete with everything you need to get your stator back in working order except for the plate itself(both coils, condenser, points, wiring, screws, O-ring, oil seal). Developed specifically for the K2-78 model
|
Honda replacement stator seal 6x1.7 (the small seals around the bolts)
Fits Honda CT70 and Z50, will fit other models, just cross reference the numbers.
#17 in the schematic.
|
Stator Assembly CT70H KO and HK1 with Hitachi Magneto Starter
NOT FOR A MITSUBISHI MOTOR- check the flywheel for the Mitsubishi emblem- if it has it this will NOT work.
|
Honda specialty 10mm Hex bolt for the flywheel component. It is #26 in the diagram.
| |
Product Reviews
|
|