Cam Chain Tensioner Roller. Will fit CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1988; ATC70 1973-74, 1978-1985; TRX70 1986-1987. It is # 4 in the diagram.
|
Cam Chain Tensioner Pivot will fit CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1988; ATC70 1973-1974, 1978-1985; TRX70 1986-1987. It is #5 in the diagram.
|
Cam Chain Tensioner Arm will fit CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1999; ATC70 1973-74, 1978-1985, and TRX70 1986-1987. It is #3 in the diagram.
|
8x12 Dowel Between the Head and Jug, also goes between the right crankcase cover and transmission case. It will fit on the CT70 1970-1994; ATC70 1973-74,1978-85; Z50A 1969-1978; Z50R 1979-1999. It is #11 and #19 in the diagrams.
|
Inner Dowel between the crankcases (10x14). Will Fit: ATC70 1973-74, 1978-85; CT70 1970-94; ST90 1973-75; CT90 1966,1969-79; Z50A 1969-1978; and Z50R 1979-1999. It is #19 in the diagram.
|
Clutch Adjusting Bolt. Will fit: ATC70 1973-74, 1978-85; TRX70 1968-87; CT70 1970-1982; Z50A 1969-1978; and Z50R 1979-95.
It is #8 in the diagram.
|
Sealing Washer for the Cam Tensioner Push Rod Bolt. It is #15 in diagram. Will Fit: CT70 1970-1994; Z50A 1969-1978; Z50R 1979-1999; ATC70 1973-1985; TRX70 1986-1987; CT90 1966, 1969-72, 1974-1979; and ST90 1969, 1974-1975.
|
CT70 1972-1982 Clutch Springs-sold individually. They will fit: CT70 1972-1982; ATC70 1973-74, 1978-1985; and TRX70 1968-1987. It is #11 in the diagram.
|
O-Ring Seal by Cam Chain Adjusting Bolt. Will fit: CT70 1972-1982; CT90 1966, 1969-1977; Z50A 1972-1978; and Z50R 1976-87.
It is #20 in the diagram.
|
CT70H/HK1 Clutch Oil Seal (12x21x4). Will fit CT70H/HK1 (1971-72); SL70 1971,1973; and XL70 1974-76.
It is #16 in the schematic.
|
Overflow Pipe Clamp will fit CT70 1970-4; ST90 1973-75; and Z50A 1970-78. It is #15 in the schematic.
|
Clutch Damper Spring- sold each
Fits:
CT70 1969-1992
Z50A 1969-1978
It is #13 in the schematic
|
Honda specialty 10mm Hex bolt for the flywheel component. It is #26 in the diagram.
|
Magnet Fixing Washer for the Flywheel
Will fit all CT70's and Z50A's. Will fit other Honda motors but you will need to cross reference those.
It is #14 in the diagram.
|
Cam Plate Side Spring. It will fit all CT70's, Z50's and other models, please check your part numbers if you have a different model than a CT70 and Z50.
It is #6 in the diagram.
|
Genuine Honda stator wire harness grommet (#12 in diagram). Fits CT70 (1970–1982) and Z50A (1970–1979). A must-have when rebuilding with a new stator kit—see full description for details.
|
OEM 17mm Circlip-used in two different areas on the CT70 Engine.
1) Kickstart Spindle 17mm Circlip #15 in schematic
2) Transmission 17mm Circlip #14 in schematic
| |