|
|
Swingarm,Chain and Tire Bolt Kits
MSRP: $28.00
Price: $26.18
You Save: $1.82 (7 %)
All bolts, washers and nuts for rims. Stainless steel. 1 set for 1 rim. The heavy hex nut (rim to hub) is slightly smaller than the stock.We cannot find a source for a stainless steel in that exact size. Please see full description for instructions.
|
Front or rear axle castle nut
|
Genuine Honda 12mm self-locking axle nut (#20 in diagram). Fits CT70 (1970 K0–1971 HKO), Z50 (1969–1978), and other Honda models. Replaces standard 12mm nut—no cotter pin needed.
|
MSRP: $10.50
Price: $9.87
You Save: $0.63 (6 %)
OEM Chain Adjuster Kit- includes the Chain Adjuster, flat and lock washer and hex nut fits most bikes but please see full description for fitment makes.
#1,28,29,26 in schematic.
|
Non-OEM swing arm bolt to frame, it is number 11, 14 and 7 in the diagram. Bolt is 137mm in length and has a 17mm head.
Will work with our Aluminum swing arm kit and as a replacement bolt for the stock CT70 steel swingarm.
|
MSRP: $15.99
Price: $14.05
You Save: $1.94 (12 %)
OEM Replacement Rear Brake Stopper Kit CT70 will replace your stock CT70 hardware.
Will work for stock CT70 1970-1981.
It is #8,10,13,15, and 17 in schematic.
|
MSRP: $9.41
Price: $8.53
You Save: $0.88 (9 %)
Aftermarket brake adjuster set for CT70, Z50, and replicas. Includes adjusters, washers, and nut. Military-grade zinc finish. See full description for fitment and details.
|
Heavy hex nuts are slightly larger and thicker than the standard hex nut, these are for the cast hub to rim bolts.
M8 x 1.25 Nut
Qty. 4
|
Limited Quantities on the Swingarm to Frame Pivot Bolt for the Z50A 1972-1978; Z50RD 1986; and the Z50R 1979-1999. It is #9 in the diagram.
|
MSRP: $7.80
Price: $7.16
You Save: $0.64 (8 %)
Mini Hardware Kit bags including; 6 mm, 10 mm, 8 mm, 8x16 flange nuts, 6 mm fender washer, 8 mm flat washer, 6x16 flange bolt, 6 mm lock nut, 6x20 flange bolt, 6x20 pan screw and 6 mm flat washer
|
OEM Replacement Stopper Arm Spring/Swingarm Spring Kit will replace the upper portion of the swingarm/brake link (stopper) spring hardware. This will work on all stock CT70. This kit will include #5,13,10, and 16 in the schematic.
|
Replacement Rear Axle bolts for Aluminum Swing Arm Kit. Designed solely as a replacement rear axle for the aluminum swingarm kits with the heavy duty chain adjusters. This will not work as a stock CT70 replacement rear axle. It is too long.
|
12" Aluminum Rim to Hub Mounting Hardware Kit includes M8x30 steel bolts, washers, and stainless steel hex nuts. Designed for front and rear applications, it ensures a secure fit and reliable performance with easy installation.
| | |
|
|