|
Thumper 2 Exhaust-S/D
MSRP: $139.99
Price: $125.00
You Save: $14.99 (11 %)
2 in stock
Item Number: TB085 S/D
Manufacturer: Trail Buddy Inc.
Not Avaliable for Free-Shipping
Each of these have blemishes/manufacturing scratches in the chrome job on the shields and some blemishes of paint on pipe. Nothing wrong with the pipe- just not as pretty as we would like it to be! No Returns/No Warranty/No Refunds. SOLD AS IS.
Please take a look at the pictures to see the different blemishes, some may have one or more blemishes.
Our best selling and performing exhaust for your aftermarket 125 or 140cc motor!
Are you looking for the best flowing exhaust system for your trail 70 but want the stock look? This is an advanced design by Trail Buddy Inc. for the classic mini trail-70 frame and with a larger cc motor installed. It will function with the clone CT70's, however some small modification may be necessary. The Thumper 2 has an open flow design with a 1 inch neck down outlet. We get the best low to top end performance with this combination. This is a new pipe manufactured for Trail Buddy.
This exhaust has been designed by us for maximum performance and sound.
Mounting Brackets
The Thumper exhaust mounting tab over the shock is bigger to fit aftermarket shocks and gives more room for the stock setup, it will stick out an extra inch unless you take the spacer off the rear shock mount. For the small mounting tab by the engine, we have had no problems. We find this helps fit more makes of engines, from the head to the mounting tab by the shock.
The exhaust will mount onto the classic mini trail-70 frame and SOME reproduction bikes, with a larger cc motor installed. If you are using this exhaust system with your stock skid plate and spark plug shield, the lower heat shield on the exhaust will need to be removed to clear the spark plug shield. The included upper heat shield can be replaced with a CT70 1972-1978 stock shield. It is not recommended and not designed to work with the stock 70cc motor due to performance issues.
Our customer supplied pictures of the demo Thumper 2 on his bike to show fitment.
This is perfect for larger engines and higher flow for more power with a great sound. Just look at the video.
We recommend taking off the exhaust stay bolt from the original bikes. They kick out the exhaust a few more inches and if you take it off the exhaust will mount closer to the frame. We have attached a pic collage of the exhaust stay with exhaust.
The Thumper may require a little persuasion depending on what engine is used, tightening too much on the head before final installation may cause fitment issues. We do not provide compensation for aftermarket parts installation issues. It is best to mount first on the head, do not tighten down, then mount on the shock bolt. Then tighten all bolts.
Does not include an exhaust gasket.
Not the best option for a 190cc motor, will fit with some modification but may not provide optimum air flow.
-This Part Will Fit-
All CT70s
All Replicas
Good for big engines
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
MSRP: $650.00
Price: $500.00
You Save: $150.00 (23 %)
Includes intake manifold, gasket, bolts, spark plug, gear shift lever, kick start lever, a 25mm carburetor, rectifier and CDI (rev box). Please see full web for more specifications and recommendations.
|
MSRP: $3.15
Price: $2.50
You Save: $0.65 (21 %)
Exhaust Gasket/Donut where the exhaust mounts into the cylinder head of the motor/engine. It is a thicker gasket measuring at 4.39mm thick. We use this on all of our service builds!
|
MSRP: $765.00
Price: $550.00
You Save: $215.00 (28 %)
This is a Lifan brand 4 speed Semi-Auto electric start engine for the CT70 frame and reproduction bikes. 4speed N1234—semi automatic (you will still need to shift with your foot). Comes with all items in the picture. See full web for detailed list.
|
|
MSRP: $735.00
Price: $565.00
You Save: $170.00 (23 %)
Brand new 140cc Manual Clutch Electric start engine from YX! This is a full wave, 420, 4 speed horizontal engine. Has the same bolt in specs for the the CT70 frames. See full description for more specifications.
|
MSRP: $735.00
Price: $560.00
You Save: $175.00 (24 %)
Brand new 140cc Semi-Automatic Electric start engine from YX! This is a full wave, 420, 4 speed horizontal engine. Has the same bolt in specs for the the CT70 frames. See full description for more specifications.
|
MSRP: $2.00
Price: $1.35
You Save: $0.65 (33 %)
Upgrade with Our M10 Acorn Nut! Ideal for shocks and exhaust stays. Sold individually—use 4 for aftermarket exhausts or 3 M10 and 1 8mm for stock. Durable and reliable. Order yours today!
|
|
MSRP: $650.00
Price: $565.99
You Save: $84.01 (13 %)
YX 140cc Engine, w/KickStart, Clutch 4 speed (N1234) 12v There is a lighting coil in this engine and will come with the following parts: Intake manifold, gasket, bolts, spark plug, gear shift lever, kick start lever, carburetor,CDI. See full web for more.
| |
Product Reviews
|
|