|
Valve Stem Seal
10 in stock
Item Number: OEM14730-028-013
- Genuine
Honda OEM Valve Stem Seal / O-Ring
- Designed
to provide a proper seal around the valve stem to help prevent oil from
entering the combustion chamber
- Diagram
reference #6
- An
essential replacement part during top-end rebuilds or valve service
Fitment Includes:
- CT70:
1970–1981
- Z50A:
1969–1978
- Z50R:
1979–1981
- ATC70:
1974–1981
- CT90:
1966, 1969–1979
Keep your engine running clean and efficient by replacing
worn or brittle valve stem seals during service.
|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
|
Cylinder Gasket- one that goes between cylinder and transmission/engine. Great if you are just replacing the top end. #2 in diagram
CT70 1970-1994
Z50A 1969-1978
Z50R 1979-1993
ATC70 1973-1985
|
Oil Passage O-Ring in Cylinder Head see #10 in diagram.
Will fit most models.
|
O-Ring/Rubber Gasket between Head and Jug. If you are doing just a top end, we recommend replacing it. Will fit many different models. It is #12 in the diagram.
|
Ignition Wire Clip. It is #5 in diagram. Will fit CT70 1970-194; Z50R 1986-1987. Mounting bolt not included. Will need to reuse your original one or will need to find a M6x20 screw.
|
8x12 Dowel Between the Head and Jug, also goes between the right crankcase cover and transmission case. It will fit on the CT70 1970-1994; ATC70 1973-74,1978-85; Z50A 1969-1978; Z50R 1979-1999. It is #11 and #19 in the diagrams.
|
6mm Specialty Bolt between the Cylinder and the Cylinder Head
Fits most CT70's and Z50's
It is #10 in the diagram.
|
Product Reviews
|
|